Printers Choice De-Foaming Agent – Foam Control for Screen Printing Recirculation Systems

Instructions for Using Printers Choice De-Foaming Agent in Recirculating Systems:

1. Dilution: Before using Printers Choice De-Foaming Agent, ensure that your recirculating system contains the ink or solution that needs to be de-foamed. The recommended dilution is 4 oz. of Printers Choice De-Foaming Agent per 30 gallons of solution. Measure the appropriate amount based on your system’s capacity.
2. Mixing: Add the measured amount of Printers Choice De-Foaming Agent directly to the recirculating system’s ink or solution. It is essential to add the de-foamer directly to the solution for optimal effectiveness.
3. Dispersion: Allow the de-foaming agent to disperse throughout the solution. The agent’s concentrated formula ensures rapid dispersion, quickly targeting the foam and preventing further build-up.
4. Observing Results: Observe the reduction in foam as the Printers Choice De-Foaming Agent takes effect. The foaming should decrease significantly, allowing the ink or solution to flow smoothly through your recirculating system.
5. Additional Application: If necessary, add more Printers Choice De-Foaming Agent to the solution to achieve the desired level of foam control. It is essential to follow the recommended dilution and avoid excessive use, as the de-foamer is highly concentrated.
6. Printing: Once the foam is under control, proceed with your screen printing process with ease. The effective de-foaming action ensures an uninterrupted workflow, allowing you to achieve high-quality prints.
7. Storage: When not in use, store Printers Choice De-Foaming Agent in a cool, dry place, away from direct sunlight. Ensure the container is tightly sealed to maintain its potency.

Note: As with any chemical product, it is essential to handle Printers Choice De-Foaming Agent with care. Wear appropriate protective gear, such as gloves and eye protection, during use. Avoid direct contact with skin, eyes, and clothing. In case of accidental contact, rinse thoroughly with water. Always follow safety guidelines and consult the Safety Data Sheet (SDS) for additional safety information.

Make the most of your recirculating system with Printers Choice De-Foaming Agent and experience smooth, efficient, and hassle-free printing without excessive foaming. Harness the power of this revolutionary de-foamer to achieve outstanding results in your screen printing process.

Printers Choice Liquid Defoamer SDS