Franmar Haze Remover Gel – Precision Gel Ghost & Haze Remover for Screen Printing
Franmar
D•Haze Gel is the heavy-duty option for stubborn ghost images and ink staining that the standard liquid D•Haze can’t clear on its own. The exclusive gel formula clings to the affected area and can sit for up to an hour or longer on tough stains — without running, drying out, or losing effectiveness. Used for targeted problem areas, not routine whole-screen application.
Price range: $22.50 through $357.00
Description
Franmar D•Haze® Gel Haze Remover
Standard D•Haze handles routine ghost images in 1–2 minutes. But some ghost images are older, deeper, or more stubborn — they need more time and more targeted application than a quick scrub provides. D•Haze Gel was developed for exactly these situations. The gel formula clings to the problem area instead of running off, stays active for up to an hour, and gives the chemistry time to work on the most stubborn staining without you having to babysit the screen.
Gel Formula Clings
Unlike liquid haze removers that run down the screen and off the mesh, the gel clings exactly where you apply it for the full dwell period.
Up to 1 Hour Dwell
For older or deeply embedded ghost images, leave D•Haze Gel on the screen for up to an hour. An hour or longer for extreme cases.
Targeted Application
Apply only to the problem area rather than the whole screen. More efficient chemical use and better results on specific ghost image locations.
Won’t Damage Mesh
Safe on all mesh types. Does not weaken fibers even during extended dwell applications.
Promotes Longer Screen Life
Good haze removal practices extend the usable life of screens. Routinely treating ghost images prevents them from becoming permanent.
Soy-Based
Made from American-grown soybeans. 100% biodegradable.
How to Use Franmar D-Haze Gel
Step 1 — Dry or Damp Screen
Apply to a dry or slightly damp screen after emulsion removal. The screen does not need to be fully dry.
Step 2 — Apply Gel to Problem Areas
Spray or pour D•Haze Gel onto the ghost image or stained areas. Focus on the affected zones rather than whole-screen application.
Step 3 — Scrub & Dwell
Scrub briefly to work the gel into the mesh. For tough stains, allow to sit for up to 1 hour (or longer for extreme cases). The gel stays wet and active.
Step 4 — Rinse
Rinse thoroughly with high-pressure water.
Step 5 — Degrease
Apply D•Grease after D•Haze Gel treatment, especially for high mesh counts (380+) and halftone work.
Note
Do not apply to the glued portion of the screen (frame-to-mesh bond). The gel will dissolve screen adhesives if it contacts the frame bonding area.
The Complete Franmar Screen Cleaning System
Franmar makes a soy-based, eco-friendly chemical for every step of the screen printing workflow — from on-press color changes through ink removal, emulsion stripping, haze removal, and mesh prep. All River City Supply Franmar products linked below:
1 · On-Press Cleanup
Franmar Color Change
Soy-based on-press ink remover for plastisol color changes. Replaces Methylene Chloride. No water rinse.
✔ No water rinse — wipe on, wipe off
2 · Ink Removal
Franmar Bean-e-doo
The original Franmar soy-based plastisol ink remover. Reclaim room use — scrub and rinse with water.
✔ Original Franmar formula — soy-based
2 · Ink Removal
Franmar Aqua-Wash
Water-based ink remover. Removes all WB inks, acts as screen opener on press. Eliminates ghost images.
✔ WB ink specialist — screen opener + remover in one
2 · Ink Removal
Franmar Greeneway
Multipurpose soy ink remover. Handles plastisol, UV, all-purpose, nylon jacket, and lacquer inks. Dilutable up to 50% with water.
✔ Any ink type — plastisol, UV, solvent, all-purpose
2 · Ink Removal
Franmar UV Ink Remover
Soy-based UV ink remover. pH 4.65, VOC 1.6%. Removes UV inks from mesh without acetone or mineral spirits.
✔ UV ink specialist — pH 4.65, VOC 1.6%
2 · Ink Removal
Franmar Solvent Ink Remover
Eco-friendly replacement for mineral spirits and volatile solvents for solvent-based ink removal. Non-flammable, biodegradable.
✔ Non-flammable solvent ink remover
3 · Emulsion Removal
Franmar Strip-e-doo
Eco-friendly emulsion remover. Removes all brands of emulsion, capillary film, and stencils. Built-in degreaser with color-change indicator.
✔ Color changes when spent — built-in degreaser
3 · Emulsion Removal
Franmar UN-Lok
Gel formula for locked, hardened emulsion that standard removers can’t break down. Stays wet up to 24 hours. Works in 30 min or less.
✔ Saves screens from remeshing — gel stays 24 hrs
5 · Adhesive Cleanup
Franmar Ickee Stickee Unstuck
Pallet adhesive remover for spray adhesive buildup on platens, squeegees, machine parts, and shop surfaces.
✔ Spray, wait, wipe — removes pallet adhesive
4 · Mesh Prep
Franmar D-Grease
Screen degreaser for mesh prep before emulsion coating. Also cleans solvent residue after press cleanup.
✔ Pre-coating mesh prep — removes oil & solvent residue
4 · Haze Removal
Franmar D-Haze
Liquid haze and ghost image remover. Apply to dry or damp screen after emulsion removal — scrub and rinse.
✔ Liquid formula — use every reclaim
← THIS PRODUCT
4 · Haze Removal
Franmar D-Haze Gel
Gel haze remover. Clings to mesh for targeted long-dwell applications. Up to 1 hour dwell. For stubborn ghost images.
✔ Gel clings — up to 1 hour dwell for tough stains
🧪 Franmar Screen Cleaning Workflow
| Step | Process | Franmar Product | Notes |
|---|---|---|---|
| 1 | On-Press Cleanup | Color Change | Quick color changes at press. No water rinse. Replaces Methylene Chloride. |
| 2 | Ink Removal | Bean-e-doo / Aqua-Wash / Greeneway / UV Remover / Solvent Remover | Remove ink from mesh. Product selection depends on ink type. |
| 3 | Emulsion Strip | Strip-e-doo / UN-Lok | Remove emulsion stencil. Strip-e-doo for routine reclaim; UN-Lok for locked emulsion. |
| 4 | Haze & Mesh Prep | D•Haze / D•Haze Gel / D•Grease | Remove ghost images. Degrease mesh before recoating. |
| 5 | Adhesive Cleanup | Ickee Stickee Unstuck | Remove pallet adhesive buildup from pallets, platens, and equipment. |
🏆 Why Order from River City Supply?
📦 Deep Inventory
Full Franmar line in stock year-round from San Antonio, TX — no waiting on backorders.
🚚 Same-Day Shipping
In-stock orders placed before 3:30 PM CT ship the same day.
🌡️ San Antonio Advantage
South Texas location — less freeze risk than northern warehouses year-round.
🎁 Free Shipping Over $200
Free ground shipping on all orders over $200.
📞 Expert Support
Call (512) 454-0505 — we know screen printing chemistry and can help you choose the right product.
⭐ 17+ Years in Business
Founded 2008. Serving screen printers nationwide since before soy-based chemistry was mainstream.
Technical Specifications
| Franmar D•Haze® Gel Haze Remover — Technical Specifications | |
|---|---|
| Product Name | Franmar D•Haze® Gel Haze Remover |
| Brand | Franmar Chemical — Made in USA |
| Type / Category | Haze Removal |
| Ink Compatibility | Treats residue from all ink types |
| Base Formula | 100% American-grown soybeans |
| VOC / Odor | Low VOC — low odor |
| Eco Profile | 100% biodegradable, non-caustic |
| Water Rinse Required | Yes — high-pressure water rinse |
| Yield | Contact us for yield data |
| Available Sizes | Quart |
Technical Sheets / Safety Data Sheets / Documents
FREQUENTLY ASKED QUESTIONS
When should I use the gel vs. the liquid D-Haze?
Use liquid D•Haze as your routine reclaim step — fast and easy for standard ghost images. Reach for D•Haze Gel when liquid D•Haze isn’t clearing the stain, or when you need targeted long-dwell treatment on a specific problem area.
How long can the gel sit on the screen?
Up to 1 hour for standard applications. An hour or longer for extreme cases. The gel stays active and wet throughout the dwell period.
Can I use it on the glued frame area?
No. Keep D•Haze Gel away from the adhesive that bonds mesh to frames. It will dissolve screen bonding adhesives.
Does it work on ghost images from dark inks like black?
Yes. D•Haze Gel is specifically suited for stubborn staining from dark plastisol, specialty inks, and older ghost images that have been allowed to set over multiple reclaim cycles.
Do I still need to degrease after using D-Haze Gel?
Yes. Follow with D•Grease before recoating, especially for high mesh counts and halftone printing.
Reviews
Only logged in customers who have purchased this product may leave a review.
You May Also Like
Related products
-
Blue Blockout Pen – Pinhole & Touch-Up Pen for Water-Based Screen Printing
$14.99 -
Expert 3000 PSI Spot Removal Gun – Powerful Removal of Cured Plastisol Inks
$239.99 -
Franmar Wash-Away Solvent Ink Remover – Soy-Based Screen Cleaner for Solvent & UV Inks
Price range: $24.99 through $3,283.00 -
Printers Choice Degreaser (1:3 Concentrate) – Professional Screen Mesh Degreaser for Screen Printing
Price range: $14.99 through $39.99
Reviews