River City Dip Tank Solution

DIRECTIONS:

Manual Cleaning: Once printing is complete, scrape excess ink from the print side of the screen. Apply River City Dip Tank Solution by spray or wipe to the print side of the screen and scrub. After the ink and emulsion are fully solubilized; apply a high pressure rinse to the print side and the well (ink) side of the screen. As a final step, apply River City Screen Wash to both sides of the screen, then high pressure rinse both screen sides. Flood rinse entire screen with low pressure rinse.

Dip Tank Cleaning: Fill dip tank with water and then add River City Dip Tank Solution at a ratio of 1 part River City Dip Tank Solution with up to 6 parts of water.  Solution concentration may vary based on screen mesh count, type of ink & emulsion used and amount of ink left on the screen. Once printing is complete, scrape excess ink from the print side of the screen. Place screens in dip tank with River City Dip Tank Solution solution. Once inks and emulsions are fully solubilized, remove screens and apply a high pressure rinse to both sides of the screen. Flood rinse entire screen with low pressure rinse.

TYPICAL PRODUCT PROPERTIES:

• Appearance ——————————- Clear, colorless liquid
• Odor—————————————- None
• pH —————————————— 4.5
• Flash Point ——————————– None
• Specific Gravity ————————— 1.06
• Weight, per U.S. gallon ——————- 8.8 lbs.
• Stability ———————————— Stable
• DOT Shipping —————————– Non-hazardous

AVAILABLE PACKAGE SIZES:

• 55 Gallon Drum
• 30 Gallon Drum
• 5 Gallon Pail
• 4×1 Gallon Case