Chromaline TexTac Liquid Pallet Adhesive
Chromaline TexTac (Formerly ImageMate TexTac)
table adhesive is an extremely popular replacement for aerosol cans.
PERFORMANCE PROPERTIES:
- Retains tack for 200 shirts or more
- Eliminates overspray onto floor, equipment and air
- Water-based, therefore more environmentally friendly
- Non-flammable
- Ideal tack strength to hold substrate in registration
- Will not transfer onto textile garment
- One gallon replaces 4 to 5 cases of aerosol containers
- Freese/Thaw Stable
- Appearance: White liquid, dries clear
- Solids: 58.5 – 62% by wt.
- Viscosity: 1,100 cps ( 3/50/77)
- Shelf Life: 1 year min. at room temp.
- pH: 4 – 5
- Wt. per gallon: 8.62 lbs.
- VOC content: < 0.50%
APPLICATIONS:
- Screen printing: holds garment down during printing
- Embroidery: keeps backer in place while stitching
$49.99 – $208.75
-
Description
Chromaline TexTac
table adhesive is an extremely popular replacement for aerosol cans.
PERFORMANCE PROPERTIES:
- Retains tack for 200 shirts or more
- Eliminates overspray onto floor, equipment and air
- Water-based, therefore more environmentally friendly
- Non-flammable
- Ideal tack strength to hold substrate in registration
- Will not transfer onto textile garment
- One gallon replaces 4 to 5 cases of aerosol containers
- Freese/Thaw Stable
- Appearance: White liquid, dries clear
- Solids: 58.5 – 62% by wt.
- Viscosity: 1,100 cps ( 3/50/77)
- Shelf Life: 1 year min. at room temp.
- pH: 4 – 5
- Wt. per gallon: 8.62 lbs.
- VOC content: < 0.50%
APPLICATIONS:
- Screen printing: holds garment down during printing
- Embroidery: keeps backer in place while stitching
Technical Specifications
INSTRUCTIONS:
Apply: TexTac can be applied to pallet manually with a card, paintbrush, or spray bottle. We recommend air assisted spray units for fine, even coatings. We suggest applying pallet tape to a clean surface – this avoids scrubbing TexTac from the pallet. Only a thin layer is needed for shirt printing; however, a thicker layer may be needed for fleece, sweatshirts, towels, or other high lint materials.
Dry: TexTac can be air-dried; however, 20 seconds under a flash unit will accelerate drying. A heavier coat of adhesive increases tack strength and dry times. TexTac will turn clear when dry.