Printers Choice Liquid Pallet Adhesive

1. Directions for Using Printers Choice Pallet Adhesive:
   1. Preparation: Ensure the pallet surface is clean and free from any dust, dirt, or previous adhesive residues. Cover the entire pallet surface with pallet tape or pallet mask, creating a smooth and protected adhesive application area.
   2. Shake Well: Before use, shake the Printers Choice Liquid Pallet Adhesive well to ensure proper mixing of the adhesive components.
   3. Application: Hold the spray bottle or container at a distance of about 6 to 10 inches from the pallet surface. Apply an even, thin layer of the pallet adhesive to the pallet area where you will place the garment. Be cautious not to overspray, as excess adhesive is not required for effective adhesion.
   4. Spreading the Adhesive: Use an Ultimate Cleanup Card or a piece of cardboard to evenly spread the applied adhesive across the pallet surface. This step ensures a smooth and consistent layer of adhesive, maximizing its effectiveness in holding the garment securely in place.
   5. Tack Time: Allow the adhesive to set for a brief moment to achieve its tackiness. The quick tack properties of the adhesive ensure a secure hold of the garment on the pallet. For faster drying, you can use a flash cure station to briefly heat the adhesive and speed up the tack time.
   6. Positioning the Garment: Carefully place the shirt or garment onto the pallet, pressing it down firmly to ensure it adheres securely to the adhesive.
   7. Printing: Proceed with the screen printing process as usual, knowing that the garment is firmly held in place on the pallet.
   8. Reapplying Adhesive: If you notice any loss of tackiness on the pallet during the print run, you can mist the Printers Choice Pallet Adhesive with a water bottle. The water mist will reactivate the adhesive, restoring its tackiness and ensuring a secure hold of the garment on the pallet. This quick and convenient reapplication method allows you to maintain an optimal adhesive surface throughout the printing process, preventing any potential issues with garment movement or misalignment. Remember to use a fine mist to avoid over-saturation of the pallet, ensuring just the right amount of adhesive reactivation. Continue printing with confidence, knowing that the adhesive is ready to securely hold your garments in place on the pallet, resulting in precise and consistent prints.
   9. Clean Up: After printing, remove the garment from the pallet. To maintain the pallet’s adhesive effectiveness, regularly clean the pallet surface and remove any residue left behind by the adhesive using a pallet cleaner or suitable cleaning solution.

   Printers Choice Liquid Pallet Adhesive is a reliable tool to securely hold garments in place while screen printing, ensuring precise and consistent prints. Remember to cover the pallet surface with pallet tape or pallet mask before applying the adhesive to protect and prolong the life of the pallet’s adhesive properties. With Printers Choice Pallet Adhesive, you can achieve professional results, enhance your screen printing efficiency, and utilize flash cure stations to expedite the drying process.

Printers Choice Pallet Adhesive Safety Data Sheet