Printers Choice LB White Plastisol Ink Non-Phthalate, High Opacity Ink – Quart
The Printers Choice High Opacity (HO) series is a high opacity plastisol ink line for direct print applications. These inks are very soft, and easy to print through a range of mesh counts. These affordable inks are print ready and designed for direct printing on 100% cotton and cotton/poly blends. Printers Choice inks are formulated for maximum print speed with minimal ink build-up on the back of the screens when printing wet-on-wet. Whether you are printing with a manual or an automatic press, Printers Choice Plastisol Inks will get the job done right every time.
- Bold and vibrant colors.
- Creamy Inks.
- Soft hand prints.
- Matte finish.
- Wet-on-wet printing.
- Short flash times, lower cure temperature.
Application & Storage Information:
Recommended Fabrics: Light colored 100% cotton or cotton/polyester blends. Use an underbase for printing dark fabrics.
Ink Application: Colors should be printed without any modifications. If thinning is required, use Curable Reducer (1% to 5% by volume).
Screen Mesh & Emulsion: 110 to 305
Emulsion: Any direct or indirect lacquer resistant emulsion. Use 35 to 70 micron capillary film for best results.
Squeegee: 60-70 Durometer: Sharp Edge 60-90-60 or 70-90-70 Triple Durometer: Sharp Edge
Cure Temperature: 325 Degrees for a minute to a minute and half. Entire ink film. Test dryer temperatures and wash test printed product before and during a production run.
Clean-up: Screen Wash 147 or any environmentally friendly plastisol screen wash.
Storage of ink containers: Recommend storage at 65F to 90F (18C to 32C). Avoid storage in direct sunlight. Keep containers well sealed.