Chromaline ChromaTech TD - Non Film Sticking Emulsion - Plastisol Inks - On Sale
Chromaline ChromaTech TD - Non Film Sticking Emulsion - Plastisol Inks - On Sale
Chromaline ChromaTech TD - Non Film Sticking Emulsion - Plastisol Inks - On Sale
Chromaline ChromaTech TD - Non Film Sticking Emulsion - Plastisol Inks - On Sale Chromaline ChromaTech TD - Non Film Sticking Emulsion - Plastisol Inks - On Sale Chromaline ChromaTech TD - Non Film Sticking Emulsion - Plastisol Inks - On Sale

Chromaline ChromaTech TD - Non Film Sticking Emulsion - Plastisol Inks - On Sale

CH Chromatech TD

This is a pure photopolymer emulsion that will not stick to your inkjet film positives. It is very fast exposing, drying, and has a two year shelf life.

Product options:

55 $55.00

Benefits:

  • Pre-Sensitized for immediate use
  • Does Not Stick to Inkjet Films
  • Very fast exposing
  • 2 Year Shelf Life
  • Fast drying
  • Superior mesh bridging
  • Excellent reclaimability
  • High solids — lower cost per screen
  • Dyed only (no mixing)
  • Degrease Using a mesh degreaser, work up a lather on both sides of mesh. Flood screen and frame thoroughly with water, then dry.
  • Coat - Slowly apply first coat to print side. Then coat squeegee side with one coat. If a thicker stencil is desired, additional coats may be applied to the squeegee side while the emulsion is wet. Note that one coat on each side with ChromaBlue is similar to four coats wet on wet with typical diazo based emulsions. Dry thoroughly between coats.
  • Dry Thoroughly dry screen in horizontal position, print side down, using a totally dark, clean drying cabinet. Temperature should not exceed 110 degrees
  • Expose Place emulsion side of photopositive in contact with print side of screen. Exposure times for ChromaTech TD are very short and accurate exposure is important for optimal results. See exposure guidelines at right.
  • Develop Gently spray both sides of screen with lukewarm water, wait 30 seconds then gently wash print side of the screen until image is fully open. Rinse both sides thoroughly. Dry screen completely and you are ready to print

Note:

  • ChromaTech TD is presensitized.
  • Stir before use. 
  • Keep pail covered when not in use.
  • Return unused emulsion from scoop coater to pail and cover as soon as possible. Emulsion dries quickly and will rapidly "skin over."

Full Description

Benefits:

  • Pre-Sensitized for immediate use
  • Does Not Stick to Inkjet Films
  • Very fast exposing
  • 2 Year Shelf Life
  • Fast drying
  • Superior mesh bridging
  • Excellent reclaimability
  • High solids — lower cost per screen
  • Dyed only (no mixing)

Technical Specifications

  • Degrease Using a mesh degreaser, work up a lather on both sides of mesh. Flood screen and frame thoroughly with water, then dry.
  • Coat - Slowly apply first coat to print side. Then coat squeegee side with one coat. If a thicker stencil is desired, additional coats may be applied to the squeegee side while the emulsion is wet. Note that one coat on each side with ChromaBlue is similar to four coats wet on wet with typical diazo based emulsions. Dry thoroughly between coats.
  • Dry Thoroughly dry screen in horizontal position, print side down, using a totally dark, clean drying cabinet. Temperature should not exceed 110 degrees
  • Expose Place emulsion side of photopositive in contact with print side of screen. Exposure times for ChromaTech TD are very short and accurate exposure is important for optimal results. See exposure guidelines at right.
  • Develop Gently spray both sides of screen with lukewarm water, wait 30 seconds then gently wash print side of the screen until image is fully open. Rinse both sides thoroughly. Dry screen completely and you are ready to print

Note:

  • ChromaTech TD is presensitized.
  • Stir before use. 
  • Keep pail covered when not in use.
  • Return unused emulsion from scoop coater to pail and cover as soon as possible. Emulsion dries quickly and will rapidly "skin over."

MSDS

Chromaline Chroma/Tech TD Technical Sheet