Matsui Fixer WF-N Drying Agent – Enhance Wash-Fastness for Lasting Prints

Directions for Using Matsui Fixer WF-N with Matsui Inks

Matsui Fixer WF-N is designed to enhance the wash fastness of your prints when used with Matsui inks. Follow these directions to effectively incorporate Fixer WF-N into your printing process:

Materials Needed:

• Matsui Fixer WF-N
• Matsui Ink (desired color)
• Screen and Frame
• Squeegee
• Printing Substrate (fabric, garment, etc.)
• Heat Source (curing oven, flash dryer, etc.)

Instructions:

1. Prepare Your Workstation: Set up your printing area, ensuring you have all the necessary materials within reach.
2. Ink Mixing: Begin by mixing your desired Matsui ink color according to the manufacturer’s guidelines. Ensure that the ink is thoroughly mixed and has the desired consistency.
3. Add Fixer WF-N: Add Matsui Fixer WF-N to your ink mixture at a ratio of 1-3% by weight. For every 100 parts of Matsui ink, add the appropriate amount of Fixer WF-N within this percentage range to enhance wash fastness.
4. Mix Thoroughly: Using clean mixing utensils, thoroughly blend the Matsui Fixer WF-N into the ink. Ensure even distribution to achieve consistent results.
5. Screen Setup: Set up your screen and frame according to your design and printing needs. Ensure proper tension and registration.
6. Printing: Apply the mixed ink with Matsui Fixer WF-N onto the substrate using your chosen printing technique. Use a squeegee to evenly distribute the ink over the screen.
7. Curing: Cure the printed substrate at a temperature of 320°F (160°C) for 2 minutes. Ensure that the heat source reaches the recommended temperature and time to achieve proper curing.
8. Cooling and Inspection: Allow the printed substrate to cool down after curing. Once cooled, inspect the print for quality, vibrancy, and wash fastness enhancement.
9. Washing Instructions: While the Fixer WF-N enhances wash fastness, it’s essential to follow recommended washing instructions for the printed substrate. This helps maintain the longevity of the print and ensures its lasting vibrancy.
10. Clean Up: Clean your equipment, tools, and workspace thoroughly to maintain the quality of your materials.

Note:

• Always refer to the manufacturer’s instructions for the recommended dosage range of Matsui Fixer WF-N based on the type and amount of ink you’re using.
• Perform a test print and wash test to ensure that the desired level of wash fastness is achieved before proceeding with larger production runs.
• Experiment and adjust the Fixer WF-N dosage as needed within the 1-3% range to achieve the desired results while maintaining proper print quality.

By following these directions, you can effectively incorporate Matsui Fixer WF-N into your Matsui ink printing process to enhance the wash fastness of your prints, ensuring they maintain their vibrancy and quality even after repeated laundering.