Murakami Photocure Pro Emulsion - Waterbase, Discharge, Solvent, Plastisol
Murakami Photocure Pro Emulsion - Waterbase, Discharge, Solvent, Plastisol

Murakami Photocure Pro Emulsion - Waterbase, Discharge, Solvent, Plastisol

MUR PRO

Photocure PRO is a dual cure emulsion with exceptional resolution qualities. Photocure PRO images hafltones and fine details with ease in an easy to use wide latitude emulsion. Designed for high end graphics and electronics it also excels at simulated process apparel printing.

Product options:

29.99 $29.99

Physical Properties:

  • Blue colored dual cure direct emulsion
  • For use with UV, plalstisol, solvent-based and water based ink systems
  • Virtually pin hole and fish eye free
  • Extremely durable on press
  • Suitable for use with water based inks when hardened with Murakami Hardeners
  • Outstanding resolution and definition properties
  • 38% solids content

Handling:  Handle under yellow safelights. Avoid exposure to sunlight, flourescent and incandescent lights.

Sensitizing:  Mix the sensitizer according to then instructions on the bottle. Pour then entire solution into the emulsion and mix thoroughly. To reduce air bubbles let the emulsion stand for two hours (preferably overnight) before using.

Mesh Preparation:  It is important to remove any contamination, residual inks, cleaning chemistry, or general dirt and dust. Haze/Ghost Remover (a non-caustic water soluble liquid) will remove residual ink and/or emulsion.  Screen Degreaser will help eliminate any further contaminants.  Completely dry the screen before coating.

Coating Procedure: 

  • Use a clean dry coating trough that has a nick free surface for smooth coating.
  • Apply one or two coats of emulsion to the print side. Rotate the frame 180 degrees and apply one or two coats of emulsion to the squeegee side.
  • Additional coats may be added to the print side if thicker stencils are required.

Drying:  Dry the coated screen horizontally with the print side down in a clean light safe area.  The following will help to ensure complete drying:

  • 86° to 104° degrees F (30° to 40° C)
  • 30% to 50% relative humidity
  • Good air circulation

The use of a screen drying cabinet with heated airflow can help in maintaining these conditions.

Exposure:  Clean the film positives and vacuum frame glass prior to exposure to minimize pinholes. Exposure is affected by mesh color, emulsion type, coating thickness, lamp type and the age of the bulb itself.  For best results use an exposure calculator to determine the correct exposure time. It is important that a lamp designed for exposing screen printing emulsions is utilized.

Note: The use of film positives that are either frosted or have weak black density can reduce resolution and definition qualities of the coated screen.

Washout:  Gently spray both sides of the screen with lukewarm water, wait a few seconds to allow emulsion to soften then wash print side of screen until image is fully open. Rinse both sides thoroughly and dry. The use of a drying cabinet or fans is recommended to dry the screen.

Storage & Handling:  Store the emulsion in a cool dry area. Unsensitized emulsion has a shelf life of at least one year when stored at room temperature.  Use the sensitized emulsion within 2-3 weeks for best results.  Coated screens may be stored for up to one month when kept under the following conditions.

  • 59° to 77° degrees F (15° to 25° C)
  • 30% to 50% relative humidity

Full Description

Physical Properties:

  • Blue colored dual cure direct emulsion
  • For use with UV, plalstisol, solvent-based and water based ink systems
  • Virtually pin hole and fish eye free
  • Extremely durable on press
  • Suitable for use with water based inks when hardened with Murakami Hardeners
  • Outstanding resolution and definition properties
  • 38% solids content

Technical Specifications

Handling:  Handle under yellow safelights. Avoid exposure to sunlight, flourescent and incandescent lights.

Sensitizing:  Mix the sensitizer according to then instructions on the bottle. Pour then entire solution into the emulsion and mix thoroughly. To reduce air bubbles let the emulsion stand for two hours (preferably overnight) before using.

Mesh Preparation:  It is important to remove any contamination, residual inks, cleaning chemistry, or general dirt and dust. Haze/Ghost Remover (a non-caustic water soluble liquid) will remove residual ink and/or emulsion.  Screen Degreaser will help eliminate any further contaminants.  Completely dry the screen before coating.

Coating Procedure: 

  • Use a clean dry coating trough that has a nick free surface for smooth coating.
  • Apply one or two coats of emulsion to the print side. Rotate the frame 180 degrees and apply one or two coats of emulsion to the squeegee side.
  • Additional coats may be added to the print side if thicker stencils are required.

Drying:  Dry the coated screen horizontally with the print side down in a clean light safe area.  The following will help to ensure complete drying:

  • 86° to 104° degrees F (30° to 40° C)
  • 30% to 50% relative humidity
  • Good air circulation

The use of a screen drying cabinet with heated airflow can help in maintaining these conditions.

Exposure:  Clean the film positives and vacuum frame glass prior to exposure to minimize pinholes. Exposure is affected by mesh color, emulsion type, coating thickness, lamp type and the age of the bulb itself.  For best results use an exposure calculator to determine the correct exposure time. It is important that a lamp designed for exposing screen printing emulsions is utilized.

Note: The use of film positives that are either frosted or have weak black density can reduce resolution and definition qualities of the coated screen.

Washout:  Gently spray both sides of the screen with lukewarm water, wait a few seconds to allow emulsion to soften then wash print side of screen until image is fully open. Rinse both sides thoroughly and dry. The use of a drying cabinet or fans is recommended to dry the screen.

Storage & Handling:  Store the emulsion in a cool dry area. Unsensitized emulsion has a shelf life of at least one year when stored at room temperature.  Use the sensitized emulsion within 2-3 weeks for best results.  Coated screens may be stored for up to one month when kept under the following conditions.

  • 59° to 77° degrees F (15° to 25° C)
  • 30% to 50% relative humidity

MSDS

Murakami Photocure PRO MSDS