River City 18” Hearts Pattern Heat Transfer Vinyl
River City 18” Hearts Pattern Heat Transfer Vinyl
River City 18” Hearts Pattern Heat Transfer Vinyl River City 18” Hearts Pattern Heat Transfer Vinyl

River City 18” Hearts Pattern Heat Transfer Vinyl

RC HTV Pattern - Hearts

River City Patterns are made in house. They require the use of a heat resistant transfer tape (Siser TTD Easy Mask). The pressure sensitive carrier allows for quick and simple weeding and the TTD Easy Mask releases easily with a hot peel after application. With a semi gloss finish and soft hand, River City Patterns are the star of the show even when applied with a home iron!

Don't forget your Siser TTD Easy Mask 20" application tape.  It is the recommended application tape for pressing complex designs. 

Please allow for addtional shipping time of 1 to 3 days when ordering River City Patterns.  Although some patterns are in stock, we typically will print for each order.

See the video below for tips on applying TTD Easy Mask

Pricing breakdown

  • 11 yards: $16.00
  • 55 yards: $15.00
  • 1010 yards: $14.00

0 $0.00

Application Instructions (heat press)

• Cut material – don’t mirror!
• Weed excess material
• Mask with TTD Easy Mask
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• Peel carrier hot or cold

Application instructions (home iron)

• Cut material – don’t mirror!
• Weed excess material
• Mask with TTD Easy Mask
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier hot or cold

EasyPatterns Apply to:

  • 100% cotton
  • Poly/cotton blends
  • 100% polyester
  • Leather

Laundering:

  • Wait 24 hours before 1st wash
  • Machine wash cold / mild detergent
  • Dry on normal dryer setting
  • Do not dry clean
  • Do not bleach

Specifications:

  • PU Composition
  • Pressure sensitive backing
  • Semi-gloss finish
  • 80 Microns/3.1 Mils
  • 45°/60° blade

Full Description

Application Instructions (heat press)

• Cut material – don’t mirror!
• Weed excess material
• Mask with TTD Easy Mask
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• Peel carrier hot or cold

Application instructions (home iron)

• Cut material – don’t mirror!
• Weed excess material
• Mask with TTD Easy Mask
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier hot or cold

EasyPatterns Apply to:

  • 100% cotton
  • Poly/cotton blends
  • 100% polyester
  • Leather

Laundering:

  • Wait 24 hours before 1st wash
  • Machine wash cold / mild detergent
  • Dry on normal dryer setting
  • Do not dry clean
  • Do not bleach

Technical Specifications

Specifications:

  • PU Composition
  • Pressure sensitive backing
  • Semi-gloss finish
  • 80 Microns/3.1 Mils
  • 45°/60° blade

MSDS