Siser Easyweed 15” Fluorescent Yellow Heat Transfer Vinyl

Siser

Siser EasyWeed heat transfer vinyl is your to-go for heat transfer projects. Siser EasyWeed 15″ HTV is a polyurethane film that is on the thinner side of heat transfer vinyls which offers a quick one-second tack application making it great for layering! Siser EasyWeed HTV has grown in popularity because it’s easy to use, it’s semi-gloss finish, and ability to press at a low temperature with low pressure. This ready-to-cut heat transfer vinyl can be cut with a laser cutting system, making it versatile. Siser EasyWeed HTV can be used in your Cricut Explore, Cricut Maker, Silhouette Cameo 3 and Cameo 4 to the wider format cutters such as the Cameo Plus, and the Graphtec CE-7000. EasyWeed is CPSIA Certified so it’s perfect for decorating children’s clothing and accessories.

$10.00

QuantityBulk Purchase Pricing
1 - 4$10.00 Per Item
5 - 9$9.00 Per Item
10 - 24$8.80 Per Item
25 - 49$8.50 Per Item
50 or more$8.00 Per Item

INFORMATION:
Adheres to: 100% cotton, 100% uncoated polyester, poly/cotton blends.
Blade: 45°/60°
Composition: PU
Microns/Mils: 90/3.5
Available in: 15” and 20”(White, Black & Glow in the dark only) 1, 5, 10, 25 and 50 yards

River City Graphic Supply will cut as many yards of Siser EasyWeed as you need, however there are price breaks for longer cut pieces.

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier hot or cold
Application Instructions (heat press)

• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• Peel carrier hot or cold

Cutter Settings:

Cricut:   Blade: Standard   Setting: Iron-on

Silhouette Cameo:   Blade: Standard, 2   Material: Heat Transfer, Smooth   Speed: 8   Force: 4

Brother ScanNCut:   Blade: Standard, 2   Cut Speed: 1   Cut Pressure: 4
Roland GX/GS-24:   Blade: 45°   Gram Force: 80-90   Offset: .250   Speed: 25-50 cm/s

Graphtec:   Blade: 45°   Force: 8-9   Tool: CB09+0   Speed: 30 cm/s

MH, SC2, LP3, and Titan1:   Blade: 45°/60°   Gram Force: 80-85   Speed: 300 mm/s    *Blade Advancing Varies

Titan 2 & 3:    Blade: 45°/60°    Gram Force: 80-85   Speed: 300 mm/s   *Blade Advancing Varies

Product categories

You May Also Like

Additional Options