Easiway EDF-200 EasiFlo™ Drain Filtration Unit – Heavy-Duty High-Volume Under-Booth Wastewater Filtration for Screen Printing
Easiway
The Easiway EDF-200 is the heavy-duty version of Easiway’s EasiFlo™ drain filtration system — built for medium-to-high volume screen printing operations where longer maintenance intervals and larger solid capacity are critical. A larger baffle tank, wider housing, and compatibility with replaceable micron bag filters make it the right choice for E-60 and E-72 installations.
✅ 200-Micron Built-In Filter
✅ Heavy-Duty 24″H × 20″L × 28″W
✅ Large Easy-Access Baffle Tank
✅ Gravity-Fed (Sump Pump Optional)
✅ Replaceable Micron Bag Filters
✅ Fits All Easiway Booths
✅ Corrosion-Resistant Polypropylene
✅ Best for E-60 & E-72
⚠️ Made to Order — Ships direct from Easiway, Delano MN. Contact us for lead time estimates.
$699.00
Description
Easiway EDF-200 EasiFlo™ Drain Filtration Unit — Heavy-Duty
The EDF-200 is the right filtration unit for shops running an E-48, E-60, or E-72 booth with meaningful daily reclaim volume. Its larger housing means you can run through a full shift — or multiple shifts — before needing to empty the baffle tank. For shops where stopping to clean filtration every few hours is not practical, the EDF-200’s capacity is the solution.
🔬
200-Micron Filter Screen
Captures ink sludge and emulsion solids at the source — clean water exits to drain; solids accumulate in the large baffle tank.
📦
Heavy-Duty Larger Housing
At 24″H × 20″L × 28″W, the EDF-200 has roughly 2.3× the internal volume of the EDF-100 — significantly longer between cleanouts.
🧦
Replaceable Micron Bag Filters
Uses the same 100/200/300 micron replacement bag filters as the EDF-100. Stock extras for maintenance.
🚰
Large Easy-Access Baffle Tank
Designed for high-volume shops — the larger tank means fewer interruptions to production for maintenance.
⚡
Gravity-Fed or Sump Pump
Works gravity-fed standard; add a sump pump for maximum drainage speed in busy reclaim environments.
♻️
Supports Compliance
Helps shops keep solids out of municipal sewer systems — important for environmental compliance and drain longevity.
Why Every Screen Printing Shop Needs Drain Filtration
Every time you wash out a screen, the rinse water carries a mix of emulsion fragments, ink pigment solids, and reclaim chemical residue. Without filtration, all of that goes directly down your drain — and it causes real problems over time:
🚽 Clogged Drains & Pipes
Emulsion solids and ink sludge accumulate in trap arms and floor drain lines. A single bad clog can mean an emergency plumber call and a production shutdown.
⚖️ Wastewater Compliance
Many municipalities restrict what commercial businesses can discharge into sewer systems. Ink and emulsion solids can put your shop out of compliance and expose you to fines.
🌿 Environmental Responsibility
Plastisol pigments and emulsion chemicals should not enter waterways. Filtration is a meaningful step toward running a cleaner, more responsible shop.
💸 Expensive Plumbing Repairs
Preventive filtration costs a fraction of what a blocked sewer line, hydrojet service call, or pipe replacement will run — often hundreds to thousands of dollars.
The Easiway EasiFlo™ filtration system solves this at the source. The EDF unit installs under your washout booth, captures solids in an easy-access baffle tank, and lets clean water exit to the drain. Pair it with replacement micron bag filters for zero-downtime ongoing maintenance.
Choose Your Filtration Solution
| Product | Type | Dimensions | Filter Rating | Best For | Link |
|---|---|---|---|---|---|
 EDF-100 EasiFlo™ Filtration Unit
| Under-Booth Unit | 24″H × 12″L × 24″W | 200 micron (built-in) | E-32, E-36, E-48 / Lower volume | View → |
EDF-200 EasiFlo™ Heavy-Duty Unit
| Under-Booth Unit | 24″H × 20″L × 28″W | 200 micron (built-in) | E-48, E-60, E-72 / Higher volume | View → |
 Micron Bag Filters Replacement Bags for EDF-100
| Replacement Filter | 4″ × 24″ | 100 µm – Fine200 µm – Standard ★300 µm – High Flow | EDF-100 ongoing maintenance | View → |
💡 Pro Tip: The EDF-100 uses replaceable micron bag filters. Keep a supply of 200 micron bags on hand (★ the standard choice for most shops) so routine filter changes never interrupt your reclaim workflow.
Compare All Easiway Washout Booths
| Model | Width | Depth | Total H | LEDs | Top Enc. | Crate | Link |
|---|---|---|---|---|---|---|---|
 E-32 | 32″ | 24″ | 64″ | — | — | No | View → |
 E-36 | 36″ | 24″ | 74″ | 2 | ✓ | Yes | View → |
 E-48 | 48″ | 24″ | 74″ | 2 | ✓ | Yes | View → |
 E-60 | 60″ | 24″ | 74″ | 3 | ✓ | Yes | View → |
 E-72 | 72″ | 24″ | 74″ | 4 | ✓ | Yes | View → |
Essential Easiway Chemicals for Your Reclaim Room
Easiway booths are engineered to work seamlessly with Easiway chemistry — formulated to be effective on emulsions and inks while staying biodegradable and compatible with drain filtration systems. Browse all screen printing chemicals →
Easiway 701
Screen Wash & Haze Remover — removes ink stains, ghost images, and emulsion haze from reclaimed mesh.
Easiway 500
Emulsion Remover Concentrate — fast-acting formula that breaks down photopolymer and dual-cure emulsions quickly.
Screen Perfect
Degreaser & Ghost-Haze Remover — preps mesh for re-coating by eliminating oils, grease, and residue from reclaimed screens.
Easiway 842
Press Wash Cleaner — removes plastisol and water-based inks from screens, squeegees, and equipment during production.
Ready to Build Your Reclaim Room?
River City Supply has been outfitting screen printing shops since 2008. We carry the full Easiway lineup — booths, filtration, replacement filters, and chemistry. Our team knows this equipment and we’re here to help you spec the right setup for your shop.
Chat With Us Now — Fastest Response
Live chat available Mon–Fri 9am–5pm CT
Technical Specifications
| Specification | Detail |
|---|---|
| SKU | EW EDF-200 |
| Dimensions | 24″ H × 20″ L × 28″ W |
| Built-In Filter | 200-micron screen |
| Replacement Bag Filters | 100, 200, & 300 micron (sold separately) |
| Tank Type | Large easy-access baffle tank |
| Drainage | Gravity-fed standard; sump pump optional |
| Material | White, welded polypropylene |
| Booth Compatibility | All Easiway washout booths |
| Best Suited For | E-48, E-60, E-72 / medium-to-high volume |
| Crate Required | No |
| Lead Time | Made to order — contact for estimate |
Technical Sheets / Safety Data Sheets / Documents
FREQUENTLY ASKED QUESTIONS
How is the EDF-200 different from the EDF-100?
The EDF-200 is physically larger — 20″L × 28″W vs 12″L × 24″W — giving it roughly 2.3× the internal volume and a larger baffle tank. Both use the same 200-micron filtration and replaceable bag filter system.
Does the EDF-200 use the same bag filters as the EDF-100?
Yes — both units use the same 4″×24″ micron bag filters in 100, 200, and 300 micron sizes.
How often do I clean the EDF-200 baffle tank?
High-volume shops may empty the tank every shift or every couple of days. Lower-volume shops may go a week or more. The larger tank specifically extends intervals.
Which booths pair best with the EDF-200?
The EDF-200 is recommended for the E-48, E-60, and E-72. For E-32 and E-36 with smaller reclaim volumes, the EDF-100 is a better fit.
Do I need a sump pump?
No — gravity-fed operation works as the standard setup. A sump pump is useful if your drain is not directly below the booth or if you need maximum drainage speed.
Is this filtration required by law?
Requirements vary by municipality. Using a filtration unit and Easiway’s eco-conscious chemistry helps ensure discharge meets common standards — but always verify local requirements.
Still have questions? We’re here to help.
Our team knows this equipment inside and out — reach out any way that works best for you.
Chat With Us Now — Fastest Response
Live chat available Mon–Fri 9am–5pm CT
Reviews
Only logged in customers who have purchased this product may leave a review.
You May Also Like
Related products
-
ROQPACK Automatic Packaging Machine – High-Speed Garment Bagging Made Effortless
-
Nortech Screen Printing Rack – Mobile 20-Screen Storage Solution – FREE SHIPPING
$398.00 -
Vastex V100 Print Arm with Standard 14″ x 16″ Pallet – Expand Your V100 Press Capacity
$151.00 -
Vastex LittleRed X2D Wide Conveyor Dryer – High-Output Curing for DTG, Plastisol, Water-Based & DTF
$7,240.00
Reviews