Hotronix® Auto Cap Heat Press – Automatic Hat Heat Press for DTF, HTV & Patches
Hotronix
The Hotronix® Auto Cap is an auto-open cap press — no air compressor needed. It opens automatically at the end of the timer, locks down with a patented magnetic assist, and includes a cap hold-down device and a Quick-Change 3.5″×6″ lower platen, with optional platens for every cap style. Made in the USA.
$1,155.00
Description
Add headwear to your lineup the easy way. The Auto Cap opens by itself at the end of the timer — no compressor — and the patented magnetic-assist lockdown delivers maximum pressure with minimal effort. A cap hold-down device and Quick-Change platen keep caps square and even, with optional platens for low-profile, oversize and full- or low-crown styles.
Why Shops Choose the Auto Cap
Auto-Open, No Compressor
Releases and opens automatically at the end of the timer with no air compressor required — preventing over-application and freeing you to multitask.
Magnetic-Assist Lockdown
Locks down with a patented magnetic assist that generates maximum pressure with minimal effort — easy on your wrists over a long shift.
Cap Hold-Down & Quick-Change Platen
A hold-down device secures the cap and creates a smooth surface, while the Quick-Change 3.5″×6″ lower platen swaps fast; optional platens fit low-profile, oversize and full/low crowns.
Even, Edge-to-Edge Pressure
Under-the-center pressure adjustment delivers consistent heat and pressure across the curved cap front.
No Cold Spots
A cast-in tubular heating element every 2″ and Platinum RTD sensor keep temperature even and accurate.
Twin Timer™
Two-stage timing for two-step or pre-heat-and-apply workflows on caps and patches.
What You Get
See It In Action
The Technology Inside
Built Tough
A 3⁄16″ HRPO laser-quality steel framework with heavy-duty pivot points and a Teflon-coated ¾″ floating upper platen built to last.
Even Heat for Curved Fronts
Cast-in tubular heat every 2″ and a Platinum RTD sensor give even, accurate pressing across the curved cap front.
Made & Supported in the USA
Built by Stahls’/Hotronix in Pennsylvania and backed by Blue Ribbon lifetime tech support.
What You Can Press
Caps & Hats
HTV, DTF and transfers on the front of structured, unstructured, low-profile and full/low-crown caps.
Patches & Emblems
Apply embroidered and printed patches to headwear with even pressure.
Sleeves & Small Areas
The small platen also works for sleeves and other small areas.
Auto Cap vs. 360 IQ Hat Press
| Feature | Auto Cap | 360 IQ Hat Press |
|---|---|---|
| Print area | Front panel (3.5″×6″ platen) | 360° — front, back & sides |
| Platens | Quick-Change + optional cap platens | One-size molded Dual Silicone Platen™ |
| Lower heat | — | Heated lower platen for patches |
| Best for | Cap fronts, value | High-volume & dimensional cap work |
Why Buy Your Stahls’ / Hotronix from River City Supply
✔ Authorized Stahls’ / Hotronix Dealer
A genuine Hotronix press shipped factory-direct from Stahls’/Hotronix — not a gray-market or refurbished unit.
💰 Same Price as Buying Direct
You get authorized-dealer pricing with the support of a real supplier behind it — no premium for ordering through us.
🌟 Serving Printers Since 2008
17+ years outfitting print shops. You talk to people who actually run this gear — not a call center.
💬 We Help You Choose
Not sure which press or platen size fits your work? Message us on Tidio, email, or call (512) 454-0505.
🏭 Factory Warranty & Support, Direct
Warranty and tech support are handled directly by Stahls’/Hotronix, the manufacturer — backed by their Blue Ribbon lifetime tech support.
📦 Complete Decorating Ecosystem
Presses, transfers, vinyl, inks and supplies on one invoice — everything your shop needs from one supplier.
Equipment Financing Available
Spread the cost of your press through our financing partner. Section 179 tax advantages may apply on qualifying equipment — consult your tax advisor. Fast approvals, low monthly payments.
Ships Directly from Stahls’
This press ships directly from Stahls’ / Hotronix. River City Supply does not stock these in our San Antonio warehouse. They are typically in stock and ready to ship. If you need it quickly, message us on Tidio or call (512) 454-0505 to verify the current lead time before ordering. Once an order is placed and has shipped, it cannot be canceled.
Support & Service by Stahls’
All warranty, technical support and service for this press are handled directly by Stahls’ / Hotronix, the manufacturer — not by River City Supply. lifetime on the heating element, 5-year framework, 2-year circuit board, and 1-year parts & labor — plus Blue Ribbon lifetime tech support.
To reach Stahls’ directly with any product issue, warranty claim or service request: (800) 727-8520 (press 1) · [email protected]
For sales, pricing or order questions, you can reach River City Supply at (512) 454-0505 or our contact page.
Please Note Before Ordering
Heat-press sales are final and non-returnable — please confirm the press fits your work before ordering. Made in the U.S.A.
Related Products & Resources
Add Caps the Easy Way
Order the Auto Cap today, or message us to compare it with the 360 IQ for your volume.
Technical Specifications
| Hotronix® Auto Cap Heat Press — Technical Specifications | |
|---|---|
| Press type | Auto-open cap / headwear clamshell (no compressor) |
| Lower platen | Quick-Change 3.5″×6″ standard (optional cap platens available) |
| Cap hold-down | Yes — secures cap and smooths the surface |
| Pressure | Under-the-center adjustment; patented magnetic-assist lockdown |
| Controls | Digital time, temperature & pressure; Twin Timer™ |
| Heater / sensor | Cast-in tubular element every 2″; Platinum RTD; ¾″ non-stick upper; 3⁄8″ silicone pad |
| Temperature range | 205°–420°F (°F or °C) |
| Electrical | 120V / 4–4.5A / 500W (240V available) |
| Weight / ship dims | ~31 lb (41 lb shipping); 26″×15″×20″ |
| Approvals | UL/ULC / CE / RoHS |
| Origin | Made in the U.S.A. |
| Warranty (via Hotronix) | Lifetime heating element, 5-year framework, 2-year circuit board, 1-year parts & labor; Blue Ribbon lifetime tech support |
| Ships from | Direct from Stahls’/Hotronix — typically 1–2 business days |
Technical Sheets / Safety Data Sheets / Documents
FREQUENTLY ASKED QUESTIONS
No — it opens automatically at the end of the timer with no compressor, using a patented magnetic-assist lockdown and auto-release.
The standard Quick-Change 3.5″×6″ platen handles most cap fronts, and optional platens fit low-profile, oversize, and full- or low-crown styles. A hold-down device keeps the cap square and smooth.
The Auto Cap is the value choice for front-panel cap printing. Step up to the 360 IQ if you want 360° front/back/side printing, a one-size-fits-all molded platen and a heated lower platen for patches and dimensional graphics.
HTV, DTF and heat transfers, plus patches and emblems. Always follow your transfer’s time and temperature for best adhesion.
Handled directly by Stahls’/Hotronix, the manufacturer: lifetime heating element, 5-year framework, 2-year circuit board and 1-year parts & labor — with Blue Ribbon lifetime tech support.
It drop-ships directly from Stahls’/Hotronix — typically within 1–2 business days.
Heat-press sales are final and non-returnable, so please confirm it fits your work before ordering.
Yes — equipment financing is available through our financing partner, and Section 179 tax advantages may apply. See financing options ›
Questions about the Auto Cap? We’re happy to help.
Reviews
Only logged in customers who have purchased this product may leave a review.
You May Also Like
Related products
-
Hotronix® Heat Press Caddie™ – Mobile Stand for Auto Clam & MAXX® Clam Heat Presses
Price range: $350.00 through $550.00 -
GeoKnight Maxi 32″x 42” Heat Press
-
GeoKnight DK20A Auto Release 16×20 Heat Press – Digital Clamshell with Pop-Up & Hover Feature
$1,650.00 -
GeoKnight DC16 14×16 Digital Combo Swing Away Heat Press (Heat Press Only)
$1,525.00
Reviews