River City 20” Silver Foil Heat Transfer Vinyl
River City Graphic Supply
The River City foil heat transfer vinyl is very shiny, thin, and easy to work with. This one press option achieves the look of foil without having to press twice. River City heat transfer foils are available in many colors: Black, Aqua, Fuchsia, Gold, Green, Red, Royal Blue, Silver, and White.
$12.00
-
Description
Information:
- Fabric : Cotton, Polyester etc.(No Nylon)
- Temperature : 275 ℉/135 ℃
- Pressure : Medium
- Time : 10 seconds
- Peeling : Warm
Technical Specifications
| Application instructions (home iron) • Set iron dial between Cotton and Linen • Cover design with Multipurpose Paper or Heat Transfer Cover Sheet • Place on flat, hard surface (ironing board not recommended) • Press iron with medium/firm pressure (do not slide iron) • Press each section of design for 10-15 seconds • If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds • Peel carrier warm |
Application Instructions (heat press) • Cover design with Multipurpose or Heat Transfer Cover Sheet • Preheat garment for 2-3 seconds • Apply design at 275°F/135°C • Use medium pressure for 10-15 seconds • Peel carrier warm |
 |
Cricut: Blade: Standard Setting: Iron-on |
 |
Silhouette Cameo: Blade: Standard, 2 Material: Heat Transfer, Smooth Speed: 8 Force: 4 |
 |
Brother ScanNCut: Blade: Standard, 2 Cut Speed: 1 Cut Pressure: 3 |
 |
Roland GX/GS-24: Blade: 45° Gram Force: 80-90 Offset: .250 Speed: 30-50 cm/s |
 |
Graphtec: Blade: 45° Force: 8-9 Tool: CB09U+0 Speed: 30 cm/s |
 |
MH, SC2, LP3, and Titan1: Blade: 45°/60° Gram Force: 85-90 Speed: 300 mm/s *Blade Advancing Varies |
 |
Titan 2 & 3: Blade: 45°/60° Gram Force: 65-70 Speed: 300 mm/s *Blade Advancing Varies |
Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.
