Siser 12” Sparkle Clear Heat Transfer Vinyl
The answer is Sparkle! This new product line from Siser® offers an alternative to those who are looking for a smooth glitter HTV. Sparkle’s appearance and feel is very similar to our now-discontinued material VideoFlex Glitter. Containing a mix of embedded colored and silver glitter flakes, Sparkle also comes on a pressure-sensitive (sticky) backing to make weeding a breeze! Additionally, Sparkle is our thinnest glittery HTV, measuring in at just 120 microns. This not only achieves for a soft, lightweight feel but also allows for some flexibility on more stretchy garments.
Finally, Sparkle can be layered on itself along with materials in the EasyWeed family!
$9.00
-
Description
The answer is Sparkle! This new product line from Siser® offers an alternative to those who are looking for a smooth glitter HTV. Sparkle’s appearance and feel is very similar to our now-discontinued material VideoFlex Glitter. Containing a mix of embedded colored and silver glitter flakes, Sparkle also comes on a pressure-sensitive (sticky) backing to make weeding a breeze! Additionally, Sparkle is our thinnest glittery HTV, measuring in at just 120 microns. This not only achieves for a soft, lightweight feel but also allows for some flexibility on more stretchy garments.
Finally, Sparkle can be layered on itself along with materials in the EasyWeed family!
- Thickness: 120 Microns/4.7 Mils
- Applies to: 100% Cotton, 100% Polyester,Cotton/Poly Blends
- Temperature: 305°F/150oC
- Time: 15 Seconds
- Pressure: Medium
- Peel: Warm
- Wait 24 hours before first wash
- Machine wash warm or cold
- Use mild detergent
- Do not bleach or dry clean
- Dry on normal setting
- Wash regularly or inside-out
Technical Specifications
Application instructions (home iron) • Set iron dial between Cotton and Linen • Cover with Heat Transfer Cover Sheet or Multipurpose Paper • Place on flat, hard surface (ironing board not recommended) • Press iron with medium/firm pressure (do not slide iron) • Press each section of design for 10-15 seconds • If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds • Peel carrier hot or cold |
Application Instructions (heat press) • Cover with Heat Transfer Cover Sheet or Multipurpose Paper • Preheat garment for 2-3 seconds • Apply design at 305°F/150°C • Use medium pressure for 10-15 seconds • Peel carrier hot or cold |
Cutter Settings:
![]() |
Cricut: Blade: Standard Setting: Iron-on |
![]() |
Silhouette Cameo: Blade: Standard, 2 Material: Heat Transfer, Smooth Speed: 8 Force: 4 |
![]() |
Brother ScanNCut: Blade: Standard, 2 Cut Speed: 1 Cut Pressure: 4 |
![]() |
Roland GX/GS-24: Blade: 45° Gram Force: 80-90 Offset: .250 Speed: 25-50 cm/s |
![]() |
Graphtec: Blade: 45° Force: 8-9 Tool: CB09+0 Speed: 30 cm/s |
![]() |
MH, SC2, LP3, and Titan1: Blade: 45°/60° Gram Force: 80-85 Speed: 300 mm/s *Blade Advancing Varies |
![]() |
Titan 2 & 3: Blade: 45°/60° Gram Force: 80-85 Speed: 300 mm/s *Blade Advancing Varies |