Siser 20” Metal Tiger Lily Heat Transfer Vinyl

Siser

Dazzle customers with this precious metal HTV! Metal HTV features a smooth finish, soft hand, and a brushed metal appearance that can be washed and worn without becoming lackluster. Unlike other metallic heat transfers, Metal HTV is super light-weight so you can wear it on almost anything. This fashion forward material is ideal for bridal parties, spirit wear, cheer, dance, and any occasion that needs a gleaming touch! Use in conjunction with other materials such as EasyWeed or StripFlock for awesome designs that hit on multiple levels! Metal is layerable as a TOP LAYER ONLY.

Metal is 100 Microns / 3.9 Mils and is a PET composition.

$12.00

15 in stock

QuantityBulk Purchase Pricing
5$12.00 Per Item
5 - 9$11.00 Per Item
10 - 24$10.80 Per Item
25 - 49$10.50 Per Item
50 or more$9.00 Per Item

Description

Adheres To:

  • 100% Cotton
  • Poly / Cotton Blends
  • 100% Polyester

Composition: PET
Blade: 45° or 60°
Thickness: 100 Microns/3.9 Mils
Layerable: Must Be Top Most Layer
Actual Width: 19.66″
Backing: Pressure Sensitive
Finish: Brushed Metal Finish

Technical Specifications

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Multipurpose Paper or Heat Transfer Cover Sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier cold
Application Instructions (heat press)

• Cover design with Multipurpose or Heat Transfer Cover Sheet
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• Peel carrier cold

 

Cricut:   Blade: Standard   Setting: Iron-on

Silhouette Cameo:   Blade: Standard, 2   Material: Heat Transfer, Smooth   Speed: 8   Force: 4

Brother ScanNCut:   Blade: Standard, 2   Cut Speed:   Cut Pressure: 3

Roland GX/GS-24:   Blade: 45°   Gram Force: 80-90   Offset: .250   Speed: 30-50 cm/s

Graphtec:   Blade: 45°   Force: 8-9   Tool: CB09U+0   Speed: 30 cm/s

MH, SC2, LP3, and Titan1:   Blade: 45°/60°   Gram Force: 85-90   Speed: 300 mm/s    *Blade Advancing Varies

Titan 2 & 3:    Blade: 45°/60°    Gram Force: 65-70   Speed: 300 mm/s   *Blade Advancing Varies


Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.

Technical Sheets / Safety Data Sheets / Documents

Video

Product categories

Reviews

Reviews

Only logged in customers who have purchased this product may leave a review.

You May Also Like

Additional Options

×