Siser EasyWeed 20” Burgundy-Bordeaux Heat Transfer Vinyl

Siser

Why is EasyWeed our number one selling heat transfer vinyl? Simple, the EasyWeed Advantage! EasyWeed applies at a lower temperature than competitor material, backing can be peeled hot or cold and doesn’t lift during weeding. It’s also extremely durable wash after wash and uses a lower pressure setting for application. EasyWeed is thinner than others on the market and offers a one-second tack application that’s great for multiple layers. EasyWeed has a pressure sensitive carrier that allows you to offer detailed designs on a wide variety of fabrics. EasyWeed can be cut with laser systems.

EasyWeed is 90 Microns / 3.5 Mils and is a PU composition.

$11.00

QuantityBulk Purchase Pricing
1 - 4$11.00 Per Item
5 - 9$9.00 Per Item
10 - 24$8.50 Per Item
25 - 49$8.00 Per Item
50 or more$7.60 Per Item

Siser EasyWeed heat transfer vinyl is your to-go for heat transfer projects. Siser EasyWeed 20″ HTV is a polyurethane film that is on the thinner side of heat transfer vinyls which offers a quick one-second tack application making it great for layering! Siser EasyWeed HTV has grown in popularity because it’s easy to use, it’s semi-gloss finish, and ability to press at a low temperature with low pressure. This ready-to-cut heat transfer vinyl can be cut with a laser cutting system, making it versatile. Siser EasyWeed HTV can be used in your Cricut Explore, Cricut Maker, Silhouette Cameo 3 and Cameo 4 to the wider format cutters such as the Cameo Plus, and the Graphtec CE-7000. EasyWeed is CPSIA Certified so it’s perfect for decorating children’s clothing and accessories.

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier hot or cold
Application Instructions (heat press)

• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• Peel carrier hot or cold

Cutter Settings:

Cricut:   Blade: Standard   Setting: Iron-on

Silhouette Cameo:   Blade: Standard, 2   Material: Heat Transfer, Smooth   Speed: 8   Force: 4

Brother ScanNCut:   Blade: Standard, 2   Cut Speed: 1   Cut Pressure: 4
Roland GX/GS-24:   Blade: 45°   Gram Force: 80-90   Offset: .250   Speed: 25-50 cm/s

Graphtec:   Blade: 45°   Force: 8-9   Tool: CB09+0   Speed: 30 cm/s

MH, SC2, LP3, and Titan1:   Blade: 45°/60°   Gram Force: 80-85   Speed: 300 mm/s    *Blade Advancing Varies

Titan 2 & 3:    Blade: 45°/60°    Gram Force: 80-85   Speed: 300 mm/s   *Blade Advancing Varies

Product categories

You May Also Like

Additional Options