Siser Easyweed 20” Stretch Red Heat Transfer Vinyl


Siser Easyweed 20” ECOStretch Red Heat Transfer Vinyl – Premium Crafting Material

In a strategic move towards innovation and sustainability, Siser has made a significant change by discontinuing its EasyWeed Stretch line and introducing Siser EcoStretch Heat Transfer Vinyl. This transition reflects Siser’s commitment to offering cutting-edge products that not only meet the high standards of their customers but also align with environmental responsibility.

Siser EcoStretch Heat Transfer Vinyl is the new go-to choice for crafters and professionals seeking a versatile, eco-friendly alternative. This shift showcases Siser’s dedication to reducing its environmental footprint while delivering top-quality products. With EcoStretch, you can expect the same ease of use, durability, and vibrant results that Siser is known for, but now with a sustainable twist.

Embrace the future of heat transfer vinyl crafting with Siser EcoStretch, and be part of the movement towards more environmentally conscious creative solutions. It’s a win-win for both your projects and the planet.


Out of stock

Email when stock available

SKU: Siser EasyWeed Stretch Red 20 Categories: ,


Adheres To:

  • 100% Cotton
  • Poly / Cotton Blends
  • 100% Uncoated Polyester
  • Lycra / Spandex

Composition: Polyurethane
Blade: 45° or 60°
Thickness: 85 Microns/3.5 Mils
Layerable: Yes
Actual Width: 19.66″
Backing: Pressure Sensitive
Finish: True Matte Finish

Technical Specifications

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Multipurpose paper or Heat Transfer Cover Sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with firm pressure (do not slide iron)
• Press each section of design for 20 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier hot or cold
Application Instructions (heat press)

• Cover design with Multipurpose paper or Heat Transfer Cover Sheet
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use firm pressure for 20 seconds
• Peel carrier hot or cold


Cricut:   Blade: Standard   Setting: Iron-on

Silhouette Cameo:   Blade: Standard, 4   Material: Heat Transfer, Smooth   Speed: 8   Force: 4

Brother ScanNCut:   Blade: Standard, 2   Cut Speed: 1   Cut Pressure: 1

Roland GX/GS-24:   Blade: 45°   Gram Force: 60-70   Offset: .250   Speed: 30 cm/s

Graphtec:   Blade: 45°   Force: 9-10   Tool: CB09U+0   Speed: 30 cm/s

MH, SC2, LP3, and Titan1:   Blade: 45°/60°   Gram Force: 80-85   Speed: 300 mm/s    *Blade Advancing Varies

Titan 2 & 3:    Blade: 45°/60°   Gram Force: 80-85   Speed: 300 mm/s   *Blade Advancing Varies

Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.


  • Wait 24 hours before 1st wash
  • Machine wash cold / mild detergent
  • Dry on normal dryer setting
  • Do not dry clean

Technical Sheets / Safety Data Sheets / Documents


Product categories



Only logged in customers who have purchased this product may leave a review.

You May Also Like

Additional Options