Mimaki CG-100SRIII 42” Plotter/Cutter

Mimaki

CG-SR III Series Go Beyond

  • Continuous crop mark detection
  • Half cut function
  • Segment compensation
  • Over cut function
  • Three selectable job speeds
  • Media load from front or back
  • Remote event notification function
  • FineCut8 and SimpleCut software included
Highlights of the Mimaki CG-SRIII Series

The Mimaki CG-SRIII Series roll-based cutting plotters include a number of features for producing a wide range of contour-cut pieces.

More application possibilities

A higher cutting pressure of 500g widens the range of materials for various applications. The clamp pressure can be adjusted to cover a wide range of sheets including thick materials. An optional sheet basket enables stable long-length cutting.

Continuous crop mark detection

An optical sensor enables automatic, consecutive detection of crop marks throughout the nested image, in combination with an automatic adjustment function for precise contour cutting.

Segment compensation

Intermediate crop marks in the feed direction enable four-point corrections for each segment. This leads to accurate, long-length cutting, even if the image is distorted.

Intermediate crop marks can be made by Finecut

Half cut mechanism


A = Die cut
(through cut)
B = Half cut
(cut through half the media)

With the proprietary half cut function, the backing sheet can be cut leaving behind a small connecting point that can be easily detached when necessary. This enables easier handling when removing the contour cut piece from the sheet.

Event Notification function

Receive status messages through the email notification system for unattended operation.

What you can do with the Mimaki CG-SRIII Series
  • Stickers
  • Labels
  • Decals
  • Heat transfer vinyl
  • Sign vinyl
  • and more…

$3,195.00

QuantityBulk Purchase Pricing
0 or more$3.00 Per Item
0 or more$3.00 Per Item

CG-SR III Series Go Beyond

  • Continuous crop mark detection
  • Half cut function
  • Segment compensation
  • Over cut function
  • Three selectable job speeds
  • Media load from front or back
  • Remote event notification function
  • FineCut8 and SimpleCut software included
Highlights of the Mimaki CG-SRIII Series

The Mimaki CG-SRIII Series roll-based cutting plotters include a number of features for producing a wide range of contour-cut pieces.

More application possibilities

A higher cutting pressure of 500g widens the range of materials for various applications. The clamp pressure can be adjusted to cover a wide range of sheets including thick materials. An optional sheet basket enables stable long-length cutting.

Continuous crop mark detection

An optical sensor enables automatic, consecutive detection of crop marks throughout the nested image, in combination with an automatic adjustment function for precise contour cutting.

Segment compensation

Intermediate crop marks in the feed direction enable four-point corrections for each segment. This leads to accurate, long-length cutting, even if the image is distorted.

Intermediate crop marks can be made by Finecut

Half cut mechanism


A = Die cut
(through cut)
B = Half cut
(cut through half the media)

With the proprietary half cut function, the backing sheet can be cut leaving behind a small connecting point that can be easily detached when necessary. This enables easier handling when removing the contour cut piece from the sheet.

Event Notification function

Receive status messages through the email notification system for unattended operation.

What you can do with the Mimaki CG-SRIII Series
  • Stickers
  • Labels
  • Decals
  • Heat transfer vinyl
  • Sign vinyl
  • and more…

Max media width

  • CG-60SRIII: 29.1 inches (74 cm)
  • CG-100SRIII: 49.2 inches (125 cm)
  • CG-130SRIII: 61 inches (155 cm)

Effective cutting width

  • CG-60SRIII: 23.8 inches (60 cm)
  • CG-100SRIII: 42.1 inches (107 cm)
  • CG-130SRIII: 53.9 inches (137 cm)

Max cutting speed  -  27.5” (70 cm) per second

Max moving speed  -  39.3” (100 cm) per second

Max downforce pressure

  • Cutter: 10-20g (2g step), 20-100g (5g step), 100-500g (10g step)
  • Pen: 10-20g (2g step), 20-100g (5g step), 100-150g (10g step)

Operational environment

  • Temp: 41˚ – 95˚ F (5˚ – 35˚ C)
  • 35-75% RH (non-condensing)

Connectivity

  • RS-232
  • USB
  • Ethernet

Power supply  -  AC100V-240V, 50/60 Hz

Dimensions (W x D x H)

  • CG-60SRIII: 40.6 x16.9 x 46.6” (103 x 43 x 33 cm)*
  • CG-100SRIII: 60.2 x 22.8 x 45.3” (153 x 58 x 115 cm)
  • CG-130SRIII: 72 x 22.8 x 45.3” (183 x 58 x 115 cm)

*height does not include optional stand

Weight

  • CG-60SRIII: 60 lbs. (24 kg)
  • CG-100SRIII: 90 lbs. (41 kg)
  • CG-130SRIII: 101 lbs. (46 kg)

Product categories

You May Also Like

Additional Options