Siser EasyWeed® 20” Fluorescent Green Heat Transfer Vinyl – High-Visibility Neon HTV

Using Siser EasyWeed Heat Transfer Vinyl is a straightforward process that allows you to personalize clothing, bags, and other fabric items with your custom designs. Here are step-by-step directions to help you get started:

Materials Needed:

• Siser EasyWeed Heat Transfer Vinyl
• Heat Press or Household Iron
• Weeding Tools (optional)
• Cutting Machine (e.g., vinyl cutter, electronic cutter)
• Teflon or Parchment Paper
• Garment or Fabric to Apply the Vinyl
• Protective Cover Sheet (e.g., silicone sheet)

Step-by-Step Instructions:

1. Design and Cut: Using a cutting machine (e.g., vinyl cutter), create your design in the desired dimensions using Siser EasyWeed Heat Transfer Vinyl. Make sure to mirror your design horizontally before cutting. This step is crucial to ensure that the text or design faces the correct way when applied to the garment.
2. Weed the Design (Optional): If your design includes intricate or unwanted parts, use weeding tools to remove the excess vinyl. This step is optional but can help achieve a cleaner result.
3. Prepare the Heat Press or Iron: Set your heat press or household iron to the recommended temperature for EasyWeed, which is typically around 305°F (150°C). Ensure that the heat press has the correct pressure settings as well.
4. Place the Garment: Position the garment or fabric on the heat press’s lower platen or a flat, heat-resistant surface. Smooth out any wrinkles or folds to ensure a flat surface for applying the vinyl.
5. Preheat the Fabric: Before applying the vinyl, preheat the fabric for a few seconds. This step helps remove any moisture and wrinkles and ensures proper adhesion.
6. Position the Vinyl: Carefully position the weeded or unweeded EasyWeed vinyl on the fabric with the adhesive (shiny) side down and the carrier sheet (dull) side up. Double-check the placement to ensure it’s where you want the design to appear on the garment.
7. Cover with a Protective Sheet: Place a Teflon or parchment paper sheet over the EasyWeed vinyl to protect it from direct contact with the heat source. If using a heat press, the top platen may have a non-stick silicone cover that can serve as the protective sheet.
8. Apply Heat and Pressure: Close the heat press or use a household iron and apply consistent pressure. Hold the heat source in place for the recommended time (usually around 15-20 seconds) to allow the EasyWeed to adhere to the fabric.
9. Cool Down and Peel: After the application time has passed, carefully lift the heat press or iron and allow the vinyl to cool down for a few seconds. Once it’s cool to the touch, gently peel off the carrier sheet in a smooth, even motion. If you notice the vinyl isn’t adhering properly, reapply heat and pressure for a few additional seconds.
10. Final Inspection: Examine the completed design to ensure it’s securely adhered to the fabric. If you applied multiple layers, make sure they have properly bonded.
11. Finished Product: Your custom design is now applied to your garment or fabric. Enjoy your personalized creation!

Remember to refer to the specific guidelines provided by Siser for your EasyWeed vinyl variant, as application temperatures and times may vary slightly depending on the color and type.

Cutter Settings:

Cricut:   Blade: Standard   Setting: Iron-on

Silhouette Cameo:   Blade: Standard, 2   Material: Heat Transfer, Smooth   Speed: 8   Force: 4

Brother ScanNCut:   Blade: Standard, 2   Cut Speed: 1   Cut Pressure: 4

Roland GX/GS-24:   Blade: 45°   Gram Force: 80-90   Offset: .250   Speed: 25-50 cm/s

Graphtec:   Blade: 45°   Force: 8-9   Tool: CB09+0   Speed: 30 cm/s

MH, SC2, LP3, and Titan1:   Blade: 45°/60°   Gram Force: 80-85   Speed: 300 mm/s    *Blade Advancing Varies

Titan 2 & 3:    Blade: 45°/60°    Gram Force: 80-85   Speed: 300 mm/s   *Blade Advancing Varies

Siser Easyweed Safety Data Sheet