Siser Easy Glow Neon Yellow – Glow in the Dark HTV 12″

Siser

Siser Easy Glow Neon Yellow – Glow in the Dark HTV 12″ is the Neon Yellow color of Siser Easy Glow, sold 12″ wide. Fluorescent and neon colors are the brightest options in most HTV lines. Siser Easy Glow is a 140-micron PU heat transfer vinyl in bright neon colors that glow in the dark and shine under black light. It is made for costumes, kids’ clothing and party wear on cotton, polyester and blends. Press at 305°F with medium pressure for 15 seconds and peel warm or cold.

Color — Neon Yellow
Width — 12″
Application temperature — 305°F / 150°C
Press time — 15 seconds
Pressure — Medium
Peel — Warm or cold
Authorized Siser dealer  |  Same-day shipping before 3:30 PM CT  |  Free shipping over $200  |  (512) 454-0505

Price range: $59.99 through $491.99

Description

Siser Easy Glow HTV — Authorized Siser Dealer

Siser Easy Glow Neon Yellow – Glow in the Dark HTV 12″

Siser Easy Glow Neon Yellow – Glow in the Dark HTV 12″ is the Neon Yellow color of Siser Easy Glow, sold 12″ wide. Fluorescent and neon colors are the brightest options in most HTV lines.

Siser Easy Glow is a 140-micron PU heat transfer vinyl in bright neon colors that glow in the dark and shine under black light. It is made for costumes, kids’ clothing and party wear on cotton, polyester and blends. Press at 305°F with medium pressure for 15 seconds and peel warm or cold.

305°F / 150°C15 secondsMediumWarm or cold

Using Neon Yellow

Fluorescent and neon colors are the brightest options in most HTV lines. They suit spirit wear, event and race shirts, kids’ clothing and anything that needs to be seen from a distance.

✓They stand out most on black, navy, charcoal and white garments. On light or pastel shirts they can look washed out.
✓Fluorescent colors may vary from batch to batch. Buy enough for a full order at once and do not mix rolls on one job.
✓Fluorescent pigments fade faster in sunlight than standard colors. For shirts worn outdoors a lot, wash inside out and dry in the shade or on low.
✓Light neon colors show dye migration on sublimated or dark polyester. Test press a spare garment before running the order.

Press settings at a glance

SettingValue
Application temperature305°F / 150°C
Press time15 seconds
PressureMedium
PeelWarm or cold
Pre-press2-3 seconds

How to apply it

  1. 1Mirror the design and cut carrier side down.
  2. 2Weed the excess material.
  3. 3Cover with a cover sheet or multipurpose paper and pre-press the garment 2-3 seconds.
  4. 4Press at 305°F / 150°C with medium pressure for 15 seconds.
  5. 5Wait a few seconds off the press, then peel the carrier warm or cold.
  6. 6If any area lifts, cover and re-press 5-10 seconds.

Before you buy

Do not use an ironing board; press on a flat, hard surface.
Do not dry clean; avoid liquid fabric softener.

The complete Siser Easy Glow guide

Bright neon colors in daylight that glow in the dark at night. Glows in several colors instead of only the typical green. Read the full Siser Easy Glow guide for every color, fabric and setting.

Related Siser colors

Sizes & SKUs

Order by SKU or call us — it is the fastest way to reorder exactly what you ran last time.

SizeSKU
5 Yard RollSiser Easy Glow Neon Yellow – 5 Yard Roll
10 Yard RollSiser Easy Glow Neon Yellow – 10 Yard Roll
25 Yard RollSiser Easy Glow Neon Yellow – 25 Yard Roll
50 Yard RollSiser Easy Glow Neon Yellow – 50 Yard Roll

Everything you need to heat press it

Heat press

Even heat and pressure make HTV last. Shop clamshell, auto-open and all heat presses.

Hat & mug presses

Press caps on a Hotronix 360 IQ hat press and drinkware on a mug press.

Cover sheet

Protect the design and your platen on every press with a 18" x 20" cover sheet.

Heat transfer pillow

Lift the print area above seams, zippers and buttons with a heat transfer pillow.

Heat tape

Hold designs in place on sleeves, pockets and hard goods with heat-resistant tape.

Platen protector

Keep your lower pad clean with Hotronix Quick Slip protectors.

Vinyl cutter & blades

Cut on a Siser Romeo or Graphtec cutter and keep spare blades on hand.

Weeding

Weed faster with a Siser Weeder Tool or a heated EZ Weeding Table.

Transfer mask

Printable and glitter materials lift and place with Siser TTD mask.

Mistake fixer

Remove misplaced vinyl with HTV remover.

Questions about Siser Easy Glow Neon Yellow – Glow in the Dark HTV 12″?

Tell us the surface or garment, the design and your cutter and we will tell you exactly what to run. Same-day shipping on orders before 3:30 PM CT from San Antonio, TX.

(512) 454-0505

Technical Specifications

Siser Easy Glow Neon Yellow – Glow in the Dark HTV 12″ — technical specifications

SpecificationDetail
ColorNeon Yellow
Width12″
Application temperature305°F / 150°C
Press time15 seconds
PressureMedium
PeelWarm or cold
Pre-press2-3 seconds
Re-press if lifting5-10 seconds, covered
Home ironCotton/Linen, 15 sec
EasyPress usersAdd about 30°
Thickness140 microns
CompositionPU
FinishNeon, glow in the dark
Compatible fabricsCotton, polyester, cotton/poly
WashCold, mild detergent, inside out
DryNormal (page) / low (PDF)
First wash wait24 hours
Blade45°/60°
Romeo/Juliet force5-15, speed 10
Cricut settingEveryday Iron On
Silhouette 4/5Blade 3, force 6, speed 8
CertificationsCPSIA, CA Prop 65
SKUsSiser Easy Glow Neon Yellow – 5 Yard Roll, Siser Easy Glow Neon Yellow – 10 Yard Roll, Siser Easy Glow Neon Yellow – 25 Yard Roll, Siser Easy Glow Neon Yellow – 50 Yard Roll

Specifications are from Siser North America. Always test-press a sample before a production run. Questions? Call (512) 454-0505.

Technical Sheets / Safety Data Sheets / Documents

FREQUENTLY ASKED QUESTIONS

Frequently asked questions

What is Siser Easy Glow Neon Yellow – Glow in the Dark HTV 12″?

Siser Easy Glow Neon Yellow – Glow in the Dark HTV 12″ is the Neon Yellow color of Siser Easy Glow, sold 12″ wide. Fluorescent and neon colors are the brightest options in most HTV lines. Siser Easy Glow is a 140-micron PU heat transfer vinyl in bright neon colors that glow in the dark and shine under black light. It is made for costumes, kids’ clothing and party wear on cotton, polyester and blends. Press at 305°F with medium pressure for 15 seconds and peel warm or cold.

Why does my new roll of fluorescent look slightly different from my last one?

Fluorescent colors can vary from batch to batch because of how they are made. Order enough for a full job at one time.

Do neon colors fade?

Fluorescent colors are less fade-resistant in sunlight than standard colors. Washing inside out and line drying out of direct sun helps them last.

What temperature do I press Siser Easy Glow at?

305°F / 150°C with medium pressure for 15 seconds, after a 2-3 second pre-press.

Is Easy Glow hot or cold peel?

Warm or cold. Give it a few seconds off the press before peeling.

What colors does it glow?

It glows in several colors, not just green. Colors are Neon Pink, Orange, Yellow, Green and Blue.

Does it work under black light?

Yes, it shines under black light.

Can I use a home iron?

Yes. Set the iron between Cotton and Linen and press each section 15 seconds on a hard surface.

What Cricut and Silhouette settings work?

Cricut: standard blade, Everyday Iron On. Silhouette 4/5: Blade 3, Heat Transfer Smooth, force 6, speed 8.

What fabrics does it work on?

100% cotton, 100% polyester and cotton/poly blends.

How do I wash it?

Wait 24 hours, machine wash cold with mild detergent, inside out. No dry cleaning or liquid fabric softener.

Reviews

Reviews

    Only logged in customers who have purchased this product may leave a review.

    You May Also Like

    Additional Options

    icon-angle icon-bars icon-times