River City 20” Chameleon Flex Heat Transfer Vinyl

River City Graphic Supply

Chameleon Flex is now available in limited supply! This soft feeling color changing vinyl will change from green to purple at different angles.




9 in stock

QuantityBulk Purchase Pricing
1 - 4$16.00 Per Item
5 - 9$14.00 Per Item
10 or more$12.00 Per Item

SKU: RC HTV Chameleon Flex Categories: ,



  • Chameleon Flex

    Temperature: 275F
    Pressure: Medium
    Time: 10 – 12 Seconds
    Peel: Warm
    Cutting Blade: 45/60 Degree
    Material: Polyurethane
    Vinyl Thickness: 100 microns
    PET Carrier Thickness: 100 microns
    Fabric Compatibility: Cotton, Polyester, Cotton-Poly blend

    Product Description: A color changing PU based transfer that changes color from purple to green when viewed from different angles.
    **CPSIA certified. 

Technical Specifications

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Multipurpose Paper or Heat Transfer Cover Sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier warm
Application Instructions (heat press)

• Cover design with Multipurpose or Heat Transfer Cover Sheet
• Preheat garment for 2-3 seconds
• Apply design at 275°F/135°C
• Use medium pressure for 10-15 seconds
• Peel carrier warm


Cricut:   Blade: Standard   Setting: Iron-on

Silhouette Cameo:   Blade: Standard, 2   Material: Heat Transfer, Smooth   Speed: 8   Force: 4

Brother ScanNCut:   Blade: Standard, 2   Cut Speed:   Cut Pressure: 3

Roland GX/GS-24:   Blade: 45°   Gram Force: 80-90   Offset: .250   Speed: 30-50 cm/s

Graphtec:   Blade: 45°   Force: 8-9   Tool: CB09U+0   Speed: 30 cm/s

MH, SC2, LP3, and Titan1:   Blade: 45°/60°   Gram Force: 85-90   Speed: 300 mm/s    *Blade Advancing Varies

Titan 2 & 3:    Blade: 45°/60°    Gram Force: 65-70   Speed: 300 mm/s   *Blade Advancing Varies

Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.

Technical Sheets / Safety Data Sheets / Documents


Product categories


You May Also Like

Additional Options