Siser 20” Copper Glitter Heat Transfer Vinyl
Bling out plain designs for maximum appeal with the best Glitter HTV on the market! Available in over 30 vibrant colors, Glitter contains maximum sparkle without shedding any glitter flakes. Perfect for dance and cheer teams and anywhere you just need a little extra sparkle. Kids of all ages love the shimmer and pop, and since it’s CPSIA Certified it’s safe to apply on kids clothing. If you currently own a sublimation system, or are thinking of getting into that sector, you can also sublimate directly onto white Siser Glitter for awesome full-color looks with all the bling of Glitter! Watch the video on how to sublimate Glitter here!
Glitter is 325 Microns / 12.8 Mils and is a PU composition.
$14.00
-
Description
Adheres To:
- 100% Cotton
- Poly / Cotton Blends
- 100% Uncoated Polyester
Composition: PVC
Blade: 45° or 60°
Thickness: 325 Microns / 12.8 Mils
Layerable: No
Actual Width: 19.66″
Backing: Adhesive Backing
Finish: Glitter
Technical Specifications
| Application instructions (home iron) • Set iron dial between Cotton and Linen • Cover design with Multipurpose Paper or Heat Transfer Cover Sheet • Place on flat, hard surface (ironing board not recommended) • Press iron with medium/firm pressure (do not slide iron) • Press each section of design for 15-20 seconds • If areas of design lift after application, replace cover sheet and re-press for 10 seconds • Peel carrier warm |
Application Instructions (heat press) • Cover design with Multipurpose Paper or Heat Transfer Cover Sheet • Preheat garment for 2-3 seconds • Apply design at 320°F/160°C • Use medium pressure for 15-20 seconds • Peel carrier warm |
 |
Cricut: Blade: Standard Setting: Iron-on+ |
 |
Silhouette Cameo: Blade: Standard, 4 Material: Heat Transfer, Smooth Speed: 8 Force: 11 |
 |
Brother ScanNCut: Blade: Standard, 3 Cut Speed: 1 Cut Pressure: 5 |
 |
Roland GX/GS-24: Blade: 45° Gram Force: 180-190 Offset: .250 Speed: 30 cm/s |
 |
Graphtec: Blade: 45° Force: 17 Tool: CB09U+0 Speed: 30 cm/s |
 |
MH, SC2, LP3, and Titan1: Blade: 45°/60° Gram Force: 120-130 Speed: 300 mm/s *Blade Advancing Varies |
 |
Titan 2 & 3: Blade: 45°/60° Gram Force: 100-110 Speed: 300 mm/s *Blade Advancing Varies |
Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.
Laundering:
- Wait 24 hours before first wash
- Machine wash warm or cold / mild detergent
- Dry on normal dryer setting
- Do not dry clean
