River City 20” Sunflower Glitter Heat Transfer Vinyl

River City Graphic Supply

Bling out plain designs for maximum appeal with Glitter HTV!  Glitter contains maximum sparkle without shedding any glitter flakes. Perfect for dance and cheer teams and anywhere you just need a little extra sparkle.

Glitter is 325 Microns / 12.8 Mils and is a PU composition.

$13.00

-

28 in stock

QuantityBulk Purchase Pricing
1 - 4$13.00 Per Item
5 - 9$11.00 Per Item
10 - 49$10.00 Per Item
50 or more$9.50 Per Item

SKU: RC HTV Glitter - Sunflower Categories: ,

Description

Adheres To:

  • 100% cotton, 100% uncoated polyester, poly/cotton blends.
  • Blade: 45°/60°
  • Composition: PU
  • Microns/Mils: 90/3.5
  • Available 20”

Technical Specifications

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Multipurpose Paper or Heat Transfer Cover Sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 15-20 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier warm
Application Instructions (heat press)

• Cover design with Multipurpose Paper or Heat Transfer Cover Sheet
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use medium pressure for 15-20 seconds
• Peel carrier warm

 

Cricut:   Blade: Standard   Setting: Iron-on+

Silhouette Cameo:   Blade: Standard, 4   Material: Heat Transfer, Smooth   Speed:   Force: 11

Brother ScanNCut:   Blade: Standard, 3   Cut Speed: 1   Cut Pressure: 5

Roland GX/GS-24:   Blade: 45°   Gram Force: 180-190   Offset: .250   Speed: 30 cm/s

Graphtec:   Blade: 45°   Force: 17   Tool: CB09U+0   Speed: 30 cm/s

MH, SC2, LP3, and Titan1:   Blade: 45°/60°   Gram Force: 120-130   Speed: 300 mm/s    *Blade Advancing Varies

Titan 2 & 3:    Blade: 45°/60°    Gram Force: 100-110   Speed: 300 mm/s   *Blade Advancing Varies


Settings may vary based on blade condition and age of machine. Always perform a test cut prior to cutting designs.

Laundering:

  • Wait 24 hours before first wash
  • Machine wash warm or cold / mild detergent
  • Dry on normal dryer setting
  • Do not dry clean

Technical Sheets / Safety Data Sheets / Documents

Video

Product categories

Reviews

You May Also Like

Additional Options

×