Siser EasyReflective HTV 20″ Silver

River City

EasyReflective is Siser’s only reflective material with a pressure sensitive backing! This highly reflective heat transfer vinyl is constructed with glass bead technology to illuminate the darkest of conditions. EasyReflective is a truly exceptional polyurethane product due to its pressure sensitive carrier that allows you to re-stick lifting material or replace a piece that’s accidentally removed. With a low application temperature and simple warm peel, EasyReflective can be applied to all kinds of garments and accessories that need to stand out in low lighting. Heat apply EasyReflective with a heat press or home iron for increased visibility on sports garments, pet clothes, or construction crew uniforms.

$13.49

-

Out of stock

Email when stock available

SKU: Siser EasyReflective Silver 20 Categories: ,

Description

Reflective Technical Specs:

    • Pressure sensitive backing
    • Silver daytime color only
    • 140 microns thick
    • Cannot be layered
    • Use for nighttime visibility and brilliance
    • Very small glass beads embedded in material for best reflect
    • Great for cyclists and runners
    • Applies to cotton, polyester, poly-cotton blends and Nylon(testing recommended for Nylon)
    • CPSIA Certified
    • Due to the manufacturing process, material may vary in width by 1/8-1/4″

Technical Specifications

Application Instructions:

    • Cut in reverse
    • Weed excess materialApplication Instructions (heat press)
      • Preheat garment for 2-3 seconds
      • Apply design at 305°F/150°C
      • Use medium pressure for 15 seconds
      • Warm Peel ( at least 15 sec after pressing)

Application instructions (home iron)

      • Set iron dial between Cotton and Linen
      • Cover design with Kraft paper or non-stick cover sheet
      • Place on flat, hard surface (ironing board not recommended)
      • Press iron with medium/firm pressure (do not slide iron)
      • Press each section of design for 10-15 seconds
      • If areas of design lift after application, replace cover sheet and re-press for 10 seconds

 

  • Peel carrier warm (at least 15 seconds off press)

Technical Sheets / Safety Data Sheets / Documents

Video

Product categories

Reviews

You May Also Like

Additional Options

×