Printers Choice Bright Stretch White Low Bleed Plastisol Ink

Printers Choice

Printers Choice Non-Phthalate Bright Stretch White Plastisol is an extremely bright white ink formulated to give excellent printability across a range of screen printing applications. Printers Choice Bright White has excellent opacity, fiber mat down, stretch capability, low gloss level, and good flash properties permit it to be utilized as both a stand-alone and an under base white.  This ink is extremely easy to print and is our best selling white ink for both automatic and manual printers.




  • Optically bright white
  • Matte finish
  • 10% Stretch Additive
  • Prints through fine meshes
  • Use as a first-down, under base flash white or an overprint stand-alone white
  • Good bleed resistance
  • Non-Phthalate
  • Odorless
  • 320 Cure Temperature

Technical Specifications

Application & Storage Information:

Recommended Fabrics: Light colored 100% cotton or cotton/polyester blends. Use an underbase for printing dark fabrics.
Ink Application: Colors should be printed without any modifications. If thinning is required, use Curable Reducer (1% to 5% by volume).
Screen Mesh & Emulsion: 110 to 305
Emulsion:  Any direct or indirect lacquer resistant emulsion. Use 35 to 70 micron capillary film for best results.
Squeegee: 60-70 Durometer: Sharp Edge 60-90-60 or 70-90-70 Triple Durometer: Sharp Edge
Cure Temperature: 325 Degrees for a minute to a minute and half.  Entire ink film. Test dryer temperatures and wash test printed product before and during a production run.
Clean-up: Screen Wash 147 or any environmentally friendly plastisol screen wash.
Storage of ink containers: Recommend storage at 65F to 90F (18C to 32C). Avoid storage in direct sunlight. Keep containers well sealed.


Product categories

You May Also Like

Additional Options