Printers Choice Plastisol ECO White Non-Phthalate, High Opacity Plastisol Ink

Printers Choice

Printers Choice ECO Plastisol White is a non-phthalate opaque white ink designed for applications on 100% cotton and cotton/polyester blends where moderate bleed resistance is required. ECO White maximizes versatility delivering commendable press performance on both automatic and manual equipment and can be used as a first-down underbase flash white or an overprint stand-alone white.



SKU: Printers Choice ECO White Plastisol Ink Categories: ,


Printers Choice Plastisol ECO White Features:

  • Exceptionally Bright White
  • Non-Phthalate
  • Good value
  • High opacity, good coverage
  • Satin finish
  • Smooth surface
  • Fast-flashing with minimal after-tack
  • Use as a first-down underbase flash white or an overprint stand-alone white
  • Easily printed with both manual and automatic presses

Technical Specifications

Application & Storage Information:

Recommended Fabrics: Light colored 100% cotton or cotton/polyester blends. Use an underbase for printing dark fabrics.
Ink Application: Colors should be printed without any modifications. If thinning is required, use Curable Reducer (1% to 5% by volume).
Screen Mesh & Emulsion: 110 to 305
Emulsion:  Any direct or indirect lacquer resistant emulsion. Use 35 to 70 micron capillary film for best results.
Squeegee: 60-70 Durometer: Sharp Edge 60-90-60 or 70-90-70 Triple Durometer: Sharp Edge
Cure Temperature: 325 Degrees for a minute to a minute and half.  Entire ink film. Test dryer temperatures and wash test printed product before and during a production run.
Clean-up: Screen Wash 147 or any environmentally friendly plastisol screen wash.
Storage of ink containers: Recommend storage at 65F to 90F (18C to 32C). Avoid storage in direct sunlight. Keep containers well sealed.


Product categories

You May Also Like

Additional Options