Printers Choice Quick Flash White Non-Phthalate, High Opacity Plastisol Ink
Printer Choice Quick Flash White is a non-phthalate premium white ink that delivers superior printability and visual appearance. Printers Choice Quick Flash White can be used as an underbase flash white or as a highlight white. It is characterized by an extremely fast flash time with low after-tack, excellent fiber mat-down, high brightness, and matte appearance. Printers Choice Quick Flash White is designed to perform well on cotton/poly fabrics where moderate bleed-resistance is required.
$34.99 – $349.99
- 100% cotton and cotton/poly blended fabrics
- Fast flash with low after-tack
- High opacity
- Smooth, bright surface
- Matte appearance
- Prints easily through recommended meshes
Application & Storage Information:
Recommended Fabrics: Light colored 100% cotton or cotton/polyester blends. Use an underbase for printing dark fabrics.
Ink Application: Colors should be printed without any modifications. If thinning is required, use Curable Reducer (1% to 5% by volume).
Screen Mesh & Emulsion: 110 to 305
Emulsion: Any direct or indirect lacquer resistant emulsion. Use 35 to 70 micron capillary film for best results.
Squeegee: 60-70 Durometer: Sharp Edge 60-90-60 or 70-90-70 Triple Durometer: Sharp Edge
Cure Temperature: 325 Degrees for a minute to a minute and half. Entire ink film. Test dryer temperatures and wash test printed product before and during a production run.
Clean-up: Screen Wash 147 or any environmentally friendly plastisol screen wash.
Storage of ink containers: Recommend storage at 65F to 90F (18C to 32C). Avoid storage in direct sunlight. Keep containers well sealed.