Printers Choice Adhesive Transfer Powder
Printers Choice Adhesive Transfer Powder is a finely ground adhesive resin specifically manufactured to increase heat transfer opacity and adhesion. To apply, screen print mirror image onto transfer paper, generously sift Printers Choice Transfer Powder over the entire image, hold paper by the edge and allow excess powder to fall off.
$99.99 – $499.99
Printers Choice Transfer Powder is a finely ground adhesive resin specifically manufactured to increase heat transfer opacity and adhesion on difficult to print substrates.
Transfers manufactured using Printers Choice powder may be printed on most all fabrics including polyester/nylon double knits, mesh jerseys and most head wear. This product is not recommend for nylon shell jackets.
Recommended Inks, Mesh and Emulsion:
- For best results use low mesh screens
- Any direct or indirect emulsion.
Screen mirror image onto paper and sift a generous amount of TP powder over entire image. Lift transfer by one side to allow excess powder to fall off and gently tap the back side of the paper to assure powder has only adhered to the image. Gel transfer to approximately 240 degrees F.
1. Preheat substrate for 2-4 seconds.
2. Apply transfer for 10 seconds at 350 degrees F – medium pressure (35-40psi).
3. Cool paper before peeling.
*NOTE: when applying to caps or other non-washable items, apply at 300 degrees for highest detail and opacity.
Keep TP powder in a sealed container and dry environment. Excessive exposure to humidity will adversely affect adhesion.