Inktek HS4903 Triple Strength Process Yellow – High-Quality Black Plastisol Ink for Four-Color Process Screen Printing

Printing Instructions

1. Screen Mesh: Use a 305-355 mesh count (120-140 cm) for optimal process color blending.
2. Stencil: Use a water-resistant, high-detail emulsion for sharp, precise prints.
3. Squeegee: A 70-75 durometer squeegee is recommended for controlled ink deposition.
4. Curing: Flash at 180-220°F (82-104°C) for quick gelling. Fully cure at 320°F (160°C) for maximum durability.
5. Ink Mixing: Process inks are transparent and should be used in combination with process cyan, magenta, and black for accurate four-color printing. Triple Strength inks require less ink in the mix due to their higher pigment load.
6. Modifiers (If Needed): Add Process Clear to adjust color intensity. Use a curable reducer for improved ink flow if necessary.

Technical Specifications

• Pantone Match: Triple Strength Process Yellow
• Color Type: Transparent for four-color process printing
• Pigment Load: 3x the pigment of standard process yellow for darker, richer color
• Viscosity: Medium-bodied for smooth printing
• Opacity: Low (intended for blending in CMYK prints)
• Print Surface: Ideal for light-colored garments and high-detail prints
• Flash Cure: 180-220°F (82-104°C)
• Full Cure: 320°F (160°C)
• Mesh Count: 305-355 mesh (120-140 cm)
• Squeegee Recommendation: 70-75 durometer
• Phthalate Compliance: Yes

Order Inktek HS4903 Triple Strength Process Yellow Today!

Achieve professional-quality four-color process prints with Inktek HS4903 Triple Strength Process Yellow Plastisol Ink. With three times the pigment load of standard process colors, this ink provides deeper, richer hues while maintaining the transparency necessary for process blending. Perfect for screen printers looking to enhance color accuracy and vibrancy, Triple Strength Process Yellow is a must-have for top-tier results.

📦 Now available in quarts and gallons. Order today and take your process printing to the next level!