Printers Choice LBX Green Non-Phthalate, High Opacity Mixing Plastisol Ink
The Printers Choice LBX mixing system is a non-phthalate finished ink mixing system formulated for a perfect balance of color accuracy and opacity for peak press performance and color design. It is an easy-to-use, easy-to-mix color mixing system with 15 inter-mixable colors that enable printers to produce accurate color matching. The increased opacity helps printers get to color quicker on press even when using fine mesh screen sizes, saving printers ink and money. Printers Choice LBX series plastisol is a non-phthalate finished ink formulated with a perfect balance of vibrant color, creaminess, and opacity for the best press performance and color design. The new low cure formulas allow for the inks to fully cure as low as 280 degrees; which increases efficiency and reducing the risk of dye migration. Printers Choice increased opacity helps printers get to color quicker on press even when using fine mesh screen sizes, saving printers ink and money.
** 5 Gallon buckets will drop ship from the manufacture. Please allow 7-10 business days for processing and shipping. ** Courier shipping is not available on 5 gallon buckets due to extra shipping and processing.
$39.99 – $349.99
- Bold and vibrant colors.
- Low Cure
- Creamy Inks.
- Soft hand prints.
- Matte finish.
- Wet-on-wet printing.
- Short flash times, lower cure temperature.
Application & Storage Information:
Recommended Fabrics: Light colored 100% cotton or cotton/polyester blends. Use an underbase for printing dark fabrics.
Ink Application: Colors should be printed without any modifications. If thinning is required, use Curable Reducer (1% to 5% by volume).
Screen Mesh & Emulsion: 110 to 305
Emulsion: Any direct or indirect lacquer resistant emulsion. Use 35 to 70 micron capillary film for best results.
Squeegee: 60-70 Durometer: Sharp Edge 60-90-60 or 70-90-70 Triple Durometer: Sharp Edge
Cure Temperature: 325 Degrees for a minute to a minute and half. Entire ink film. Test dryer temperatures and wash test printed product before and during a production run.
Clean-up: Screen Wash 147 or any environmentally friendly plastisol screen wash.
Storage of ink containers: Recommend storage at 65F to 90F (18C to 32C). Avoid storage in direct sunlight. Keep containers well sealed.