Printers Choice HX Pantone Matching Non-Phthalate, High Opacity Plastisol Ink Starter Kit
Printers Choice Pantone Matching Ink Mixing System Ink Introducing Printers Choice PCHX (Phthalate Compliant High Opacity Mixing) ready to use mixing inks. These inks are economically priced and easy to use. These plastisol inks are formulated to be used right out of the bucket for wet-on-wet production and provides extremely low build up. The color matching system consists of 15 mixable colors that will enable you to create pantone colors for printing on white and dark fabrics.
$299.99 – $899.99
This kit includes the following inks in quarts or gallons:
- PCHX White
- PCHX Black
- PCHX Yellow
- PCHX Green
- PCHX Blue
- PCHX Marine
- PCHX Violet
- PCHX Magenta
- PCHX Red
- PCHX Orange
- PCHX Fluorescent Pink
- PCHX Fluorescent Blue
- PCHX Fluorescent Yellow
- PCHX Fluorescent Purple
- PCHX Fluorescent Red
Press Ready; just stir and start printing. For printing on 100% cotton and 50/50 blends. Can be used on light medium and dark colored fabrics. Printers Choice Inks are very soft and easy to print with, and do not build up on the underside of the screen.
HO Series High Opacity Wet-On-Wet Plastisol Textile Inks Application:
-Recommended to be printed on light, medium, and dark color textiles of cotton or cotton/polyester blends
-Cold peel transfers
-Maximum coverage on dark fabrics
-Easy printability on manual or automatic equipment
-Creamy consistency and clean release from screen
-Consistent quality order after order
-Printers Choice High Opacity series plastisol inks may be printed through meshes ranging up to 305 monofilament dependant upon the desired effect. Though monofilament is recommended, multifilament may also be used.
-Printers Choice High Opacity series plastisol inks are recommended to be fused at 325oF. Remember that plastisol fusion is a time/ temperature process. Printers Choice High Opacity series inks may be flashed from 240-260oF, followed by complete fusion in a conventional oven for direct printing; or gelling at 240-260oF on release paper for cold peel transfers.
Extending With Neutral or Clear Base:
-Printers Choice High Opacity series plastisols are formulated for maximum opacity when printing onto black or dark colored fabrics. Printers Choice High Opacity series plastisols can be extended with HO044 Neutral extender or SE014 Soft Hand Clear when printing on white or light colored textiles.
HO044 Neutral Extender VS SE014 Soft Hand Clear
-Extending Printers Choice High Opacity series inks with HO044 does not affect printing properties, and colors extended with HO044 Neutral Extender are more suitable for printing wet-on-wet on top of a flashed underbase than are those extended with SE014 Process Clear. However, colors extended with SE014 Process Clear have easier printability and a softer hand than the standard Printers Choice High Opacity series inks or colors extended with HO040 Neutral Extender.
-Printers Choice series plastisols are formulated ready to use. Reducer #1, Special Reducer, or Curable Reducer may be used if desired. All reducers will change the opacity and cure. Always pretest when adding any products to the prepackaged ink.
-Spray Wipes, Ink Degradents, etc.
-Printers Choice Ink Colors
-Qaurt, 1 gallon, 5 gallon pails, 30 gallon drum, 50 gallon drums Orders:
Note: -Always pretest ink and fabric under normal plant conditions before starting a production run.