Printers Choice Chill White Non-Phthalate, Low Cure Plastisol Ink
Printers Choice Chill White is a low cure Plastisol with high opacity. Chill White Plastisol Ink is formulated for printing on 100% cotton and 50/50 polyester/cotton blends. Chill White Plastisol Ink can be used as an underlay or highlight or both. It has been formulated to cure at the low temperature of 270°F while keeping a high opacity for use with a wide range of applications. Cure at 270°F for 2-3 minutes for optimum results.
$29.99 – $299.99
- Optically bright white
- Low cure tempurature
- Matte finish
- Use as a first-down, underbase flash white or an overprint stand-alone white
- Good bleed resistance
Application & Storage Information:
Recommended Fabrics: Light colored 100% cotton or cotton/polyester blends. Use an underbase for printing dark fabrics.
Ink Application: Colors should be printed without any modifications. If thinning is required, use Curable Reducer (1% to 5% by volume).
Screen Mesh & Emulsion: 110 to 305
Emulsion: Any direct or indirect lacquer resistant emulsion. Use 35 to 70 micron capillary film for best results.
Squeegee: 60-70 Durometer: Sharp Edge 60-90-60 or 70-90-70 Triple Durometer: Sharp Edge
Cure Temperature: 270 Degrees for a minute to a minute and half. Entire ink film. Test dryer temperatures and wash test printed product before and during a production run.
Clean-up: Printers Choice Ink Degradant or any environmentally friendly plastisol screen wash.
Storage of ink containers: Recommend storage at 65F to 90F (18C to 32C). Avoid storage in direct sunlight. Keep containers well sealed.