Vastex LittleRed X1D Wide Conveyor Dryer
Available in two widths, the X1D is the smallest conveyor dryer matched to the output of the most popular DTG printing systems. Its heating chamber has a boost zone to quickly reach cure temperatures for ink jet, water-based and discharge inks.
The LittleRed X1D-18 with an 18 in. (46 cm) wide conveyor belt has a heating chamber the full width of the belt, and can dry Digital White Ink at rates up to 34 pieces per hour at 2 minutes dwell time, or up to 81 garments/hr with water-based ink or discharge, and cure up to 162 garments per hour with plastisol ink.
The LittleRed X1D-30 with a 30 in. (76 cm) wide conveyor belt features a 24 in. (61 cm) wide heater and can dry Digital White Ink at rates up to 29 pieces per hour at 2 minutes dwell time, or up to 65 garments/hr with water-based ink or discharge, and cure up to 150 garments per hour with plastisol ink.
It eliminates the flattened, ironed-on appearance and halo associated with heat pressing of printed images, and relegates the heat press to flattening of raised fibers prior to printing with a one second ‘touch’ per garment.
$3,295.00 – $3,895.00
Can cure plastisol, water-based, discharge and inkjet-printed white ink in record time
Industry-leading 15-year heater warranty
Closely spaced coils provide high-density, medium-wavelength infrared heat for maximum cure speed without cold spots or under-curing
Low friction belt aligner and DC belt speed control with digital display
“X-Series” Conveyor Belt Tracking System with Teflon coated fiberglass belt
Digital PID Temperature controller is accurate to +/-1°F
2 – 7 in. (5 – 18 cm) belt-to-heater clearance, adjustable separately on each side for each heater