Vastex LittleRed X3D Conveyor Dryer with Advanced Digital Control

Vastex

Introducing the versatile Vastex LittleRed® X3D Infrared Dryer, a cutting-edge solution that revolutionizes the curing process for direct-to-garment (DTG) printed textiles, plastisol, water-based, and discharge-printed garments, and DTF adhesive-coated images. Say goodbye to conventional dryer limitations, as the Little Red X3D sets new standards for efficiency and performance, allowing you to achieve higher rates of curing than ever before.

Designed with a modular concept, this dryer offers expandability, enabling seamless addition of chambers and conveyor length to meet your evolving production needs. Available in three belt widths: 30 in. (76 cm), 54 in. (137 cm), and 78 in. (198 cm), the LittleRed X3D boasts a high-powered pre-heating zone that propels ink temperatures to an impressive 300°F (149°C) within the initial inches of conveyor travel. This ensures optimal curing distance and dwell time for all types of ink and adhesives, translating into faster conveyor belt speeds and increased dryer output.

The Little Red X3D-30 comes equipped with a 30 in. (76.2 cm) wide conveyor belt and three 24 in. (61 cm) wide infrared heaters, boasting a total wattage of 8900W @ 240V. It can handle the curing of 360+ plastisol-printed garments per hour, 185+ water-based or discharge-printed garments per hour, and up to 51+ garments per hour with inkjet printed digital white ink at 3 minutes dwell time*.

For enhanced productivity, the 54 in. (137 cm) wide LittleRed X3D-54 can cure an impressive 720+ plastisol-printed garments per hour, 370+ water-based or discharge-printed garments per hour, and 103+ garments per hour with inkjet printed digital white ink or DTG pretreatment at 3 minutes dwell time*.

For the pinnacle of efficiency, the 78 in. (198 cm) wide LittleRed X3D-78 accommodates up to three rows of garments and delivers astounding results, curing 1080+ plastisol-printed garments per hour, 555+ water-based or discharge-printed garments per hour, and 155+ garments per hour with inkjet printed digital white ink or DTG pretreatment at 3 minutes dwell time*.

All X3D models boast a 41 in. (104 cm) long heating chamber and come standard with a powerful, targeted exhaust system. This exhaust system rapidly eliminates moisture and air contaminants from the heating chamber, while also keeping the outer cabinet cool and maintaining optimal control.

For even higher production capacity, the LR-X3D-30-2 and LR-X3D-54-2 models come equipped with a second X3 chamber, allowing for extended curing times necessary for Kornit printers and other high-volume production demands.

Experience unparalleled efficiency and reliability with the LittleRed X3D Infrared Dryer, a game-changer in the world of garment curing. Take your production capabilities to new heights and achieve consistent, flawless results with this advanced drying solution.

$7,970.00$17,935.00

SKU: LR-X3D-Conveyor-Dryer Categories: ,

Description

Introducing the Vastex LittleRed X3D, a cutting-edge infrared dryer that takes garment curing to new heights. This advanced dryer is packed with key features that make it a flexible, powerful, and dependable solution for all your curing needs.

FLEXIBLE: The LittleRed X3D is a versatile powerhouse that can cure plastisol, water-based, discharge, and inkjet-printed white ink in record time. Whether you’re working with traditional inks or digital printing, this dryer has got you covered.

POWERFUL: With varying wattages across different models, the LittleRed X3D delivers exceptional performance. The X3D-30 offers 8900W@240V total wattage, the X3D-54 boasts 17,800W@240V total wattage, and the X3D-78 impresses with 26,700W@240V total wattage.

DEPENDABLE: Backed by an industry-leading 15-year heater warranty, you can trust the LittleRed X3D to deliver consistent and reliable performance year after year.

EFFICIENT: Equipped with closely spaced coils, this dryer provides high-density, medium-wavelength infrared heat for maximum cure speed without cold spots or under-curing. Say goodbye to uneven curing results.

FAST: The LittleRed X3D delivers lightning-fast curing speeds to boost your production rates. For example, the X3D-30 can cure up to 360+ garments/hr for plastisol inks, 185+ garments/hr for water-based or discharge inks, and 51+ garments/hr for DTG digital white ink at 3 minutes.

CONSISTENT: Achieve precise and consistent curing with the low friction belt aligner and DC belt speed control with digital display. Say hello to repeatable results with every run.

HEAVY DUTY: Built with a robust “X-Series” Conveyor Belt Roller Tracking System, Teflon coated fiberglass belt, and HD belt motor, the LittleRed X3D is engineered to withstand heavy-duty usage and perform flawlessly.

ACCURATE: The dual digital PID Temperature controller ensures accurate temperature control within a tight tolerance of +/-1°F, giving you full control over the curing process.

ADJUSTABLE: Tailor the curing process to your specific needs with the adjustable 2 – 7 in. (5 – 18 cm) belt-to-heater clearance, adjustable separately on each side for each heater. Versatility at your fingertips.

EXPANDABLE: As your production needs grow, the LittleRed X3D can easily expand to accommodate them. Add additional chambers and belt extensions for increased capacity.

The LittleRed X3D is the ultimate solution for all your curing requirements. Experience the power, precision, and reliability of this advanced infrared dryer, and take your garment printing to new heights of excellence.

Technical Specifications

LR-X3D-30:

  • Heaters: 3 heaters
  • Total Wattage: 8,900W (8.9kW)
  • Belt Width: 30” (76cm)
  • Overall Length: 88” (224cm)
  • Plastisol: 360/hr @ 25 secs
  • Water-based: 185/hr @ 50 secs
  • Digital white:
    • 77/hr @ 2 min
    • 51/hr @ 3 min
  • Time in Tunnel Range: 00:22 – 03:10 (mm:ss)
  • Belt Speed: 0.7 – 9.3 FPM (0.2 – 2.8 MPM)
  • Belt Motor Torque: 100 in-lb
  • Exhaust (Free Air): 388 CFM (11 CMM)
  • Exhaust Diameter: 6” (15.24 cm)
  • Overall Width: 41″ (105 cm)
  • Overall Height: 50” (127 cm)
  • Chamber Length: 27” (69cm)
  • Chamber Infeed Width (adjustable): 2″ – 7″ (5 – 17.7 cm)
  • Heat Range @ Heater (at spec voltage): 0-900F° (0-482C°) @ 240V
  • Heater Size: 12″ x 24″ (30 x 61 cm)
  • Electrical Specs: 240V / 30A / 1 Ph. / 3 wire 50/60HZ

LR-X3D-54:

  • Heaters: 3 heaters
  • Total Wattage: 17,800W (17.8kW)
  • Belt Width: 54” (137cm)
  • Overall Length: 88” (224cm)
  • Plastisol: 720/hr @ 25 secs
  • Water-based: 370/hr @ 50 secs
  • Digital white:
    • 154/hr @ 2 min
    • 103/hr @ 3 min
  • Time in Tunnel Range: 00:22 – 03:10 (mm:ss)
  • Belt Speed: 0.7 – 9.3 FPM (0.2 – 2.8 MPM)
  • Belt Motor Torque: 100 in-lb
  • Exhaust (Free Air): 550 CFM (15.6 CMM)
  • Exhaust Diameter: 8” (20.32 cm)
  • Overall Width: 65″ (166 cm)
  • Overall Height: 50” (127 cm)
  • Chamber Length: 41” (104cm)
  • Chamber Infeed Width (adjustable): 2″ – 7″ (5 – 17.7 cm)
  • Heat Range @ Heater (at spec voltage): 0-800F° (0-427C°) @ 240V
  • Heater Size: 12″ x 48” (30 x 122 cm)
  • Electrical Specs: 240V / 42A / 1 Ph. / 3 wire 50/60HZ

LR-X3D-78:

  • Heaters: 3 heaters
  • Total Wattage: 26,700W (26.7kW)
  • Belt Width: 78” (198cm)
  • Overall Length: 102” (260cm)
  • Plastisol: 1,080/hr @ 25 secs
  • Water-based: 555/hr @ 50 secs
  • Digital white:
    • 231/hr @ 2 min
    • 155/hr @ 3 min
  • Time in Tunnel Range: 00:22 – 03:10 (mm:ss)
  • Belt Speed: 0.7 – 9.3 FPM (0.2 – 2.8 MPM)
  • Belt Motor Torque: 100 in-lb
  • Exhaust (Free Air): 1,100 CFM (31.2 CMM)
  • Exhaust Diameter: 8” (20.32 cm)
  • Overall Width: 89” (226 cm)
  • Overall Height: 54” (137 cm)
  • Chamber Length: 41” (104cm)
  • Chamber Infeed Width (adjustable): 2″ – 7″ (5 – 17.7 cm)
  • Heat Range @ Heater (at spec voltage): 0-900F° (0-482C°) @ 240V
  • Heater Size: 12″ x 72″ (30 x 183 cm)
  • Electrical Specs: 240V / 73A / 3 Ph. / 4 wire 50/60HZ

Please note that these specifications are for the LR-X3D series models.

Technical Sheets / Safety Data Sheets / Documents

Video

Product categories

Reviews

Reviews

Only logged in customers who have purchased this product may leave a review.

You May Also Like

Additional Options

×