Matsui SI0301 Yama Base High Stretch Silicone Ink Mixing Base – Flexible Silicone Mixing Base for Performance Apparel Printing

Matsui Yama Base High Stretch Silicone Ink Mixing Base Technical Specifications:

Mixing Instructions:

• Stir base thoroughly before use

• Add Matsui Yama Silicone Pigments to desired color strength

  • Typical pigment load: 3%–10% by weight

• Add Matsui Silicone Catalyst

  • Standard ratio: 90% base + 10% catalyst

• Mix thoroughly until uniform

• Allow mixture to rest 5–10 minutes to release air bubbles

• Only mix what you can use within the pot-life window (approx. 4–6 hours)

Screen Setup:

Printing:

• Print 1–2 strokes per layer

• Flash between layers if needed

  • Flash temp: ~220°F (104°C)

  • Flash time: 5–8 seconds

• For darker or dye-migrating fabrics, print over a silicone blocker base

Curing:

Ensure full cure for maximum stretch, wash durability, and adhesion.

Clean-Up:

• Use silicone-friendly ink cleaner
• Do not thin with non-approved solvents

Best Practices:

• Keep screens flooded to prevent drying
• Run test prints before production
• Store ink sealed at 65–77°F (18–25°C)
• Use low-mesh screens for high opacity builds
• Use silicone mat or paper during post-press
• Do not mix with non-silicone systems
• Do not over-catalyze (shortens pot life)

Product Properties:

Matsui Yama Base Technical Data Sheet