Saati Hi-Dro MZX Newman Style Roller Frame Mesh Panels 23″×31″ (6-Pack) – Thin Thread Plasma-Treated Mesh for Newman MZX Retensionable Roller Frames
Nortech
The Saati Hi-Dro MZX Newman Style Roller Frame Mesh Panels 23″×31″ (6-Pack) bring Saati’s thin-thread, plasma-treated Hi-Dro mesh to the Newman MZX-style roller frame — the workhorse retensionable frame for manual press and smaller auto press shops. With a 1 7/16″ roller diameter and 35N max tension, MZX frames are the entry point into the Newman roller frame system. These panels deliver Hi-Dro’s wider mesh openings, lower squeegee pressure requirements, and no-degreasing plasma treatment — purpose-built for water-based and discharge inks. Not compatible with M3 frames.
⚠️ Frame Compatibility Warning
These panels fit MZX-style Newman roller frames only (1 7/16″ roller diameter). They will NOT fit M3 frames (1 5/8″ roller diameter). See the Description tab for a full M3 vs MZX comparison and how to identify your frame before ordering.
⚠️ Drop Ship Item: Ships directly from Nortech Graphics in Arkansas. Shipping times vary. Questions? Contact us at [email protected] or at (512) 454-0505.
Price range: $99.99 through $121.99
Description
Hi-Dro Quality for MZX Roller Frames — The Manual Press Thin Thread Upgrade
MZX frames are Newman’s manual press system — retensionable up to 35 Newtons, lighter than M3 frames, and ideal for shops doing large-image printing on manual presses or lower-volume auto work. Hi-Dro’s thin thread and wider mesh openings compound the MZX system’s retensionability benefit — less squeegee pressure at whatever tension level you run, cleaner ink release on snap-off, and no degreasing step slowing down your coating workflow.
📦 What’s Included
Six (6) Saati Hi-Dro mesh panels sized 23″×31″ with MZX-profile locking strips, pre-woven and ready to install in your Newman MZX-style roller frame. Mesh count and color selected at time of purchase. Note: This is the mesh panel only — the roller frame is not included. Newman Roller Master or manual stretching tools required for installation and tensioning. Not compatible with M3 frames.
MZX vs. M3 — Know Your Frame Before Ordering
These panels are for MZX-style frames only (1 7/16″ roller diameter, 35N max tension). They will NOT fit M3 frames. Check your frame: M3 has 1 5/8″ rollers, larger corners, requires a 3/4″ socket. MZX has 1 7/16″ rollers, smaller hardware, lower maximum tension. When in doubt, call us at (512) 454-0505 before ordering.
🟠 MZX Frame (Order These)
1 7/16″ roller · 35N max · smaller hardware · manual & small auto shops
🔵 M3 Frame (Order M3 Panels Instead)
1 5/8″ roller · 85N max · 3/4″ socket · larger hardware · production auto press
🔗 You’ll Also Need: Locking Strips
These mesh panels require locking strips to secure the mesh into your Newman roller frame channels. Locking strips are sold separately — add a roll to your order to complete your setup. → Nortech Newman Roller Frame Locking Strip (50ft Roll)
🎬 Watch: Newman Roller Frame Panel Installation
See how mesh panels install into Newman roller frames and how the retensioning system works.
Why Hi-Dro Pairs Well with MZX Roller Frames
💪 Less Pressure at MZX Tension Levels
MZX frames run at up to 35 Newtons. At that tension level, Hi-Dro’s wider mesh openings mean ink clears the screen more easily than standard Hi-Tex — requiring less squeegee force. For manual press operators running MZX frames, that reduction in effort per stroke adds up significantly across a long production run.
💧 Purpose-Built for Water-Based
Hi-Dro was engineered specifically for water-based and discharge inks. The plasma treatment reduces water-based ink drying in the screen during pauses. The thinner thread and wider openings let water-based inks flow through more freely. On MZX frames used for large-image manual water-based printing, this is the right mesh choice.
⚡ No Degreasing — Coat Immediately
Hi-Dro’s DBD plasma treatment eliminates the degreasing prep step entirely. Install the panel, tension it to spec, and coat with emulsion immediately. No extra prep time, no forgotten degreasing steps causing stencil failure on press.
Hi-Dro MZX — Mesh Count Guide
| Mesh Count | Color | Thread Dia. | Open Area | Best For |
|---|---|---|---|---|
| 110 Hi-Dro | ⬜ White | 64 µm | ~60% | Discharge whites, heavy water-based deposits, thick specialty inks |
| 157 Hi-Dro | ⬜ White | 48 µm | 46% | General water-based spot colors, all-around production printing |
| 157 Hi-Dro | 🟨 Yellow | 48 µm | 46% | Most popular. Halftones, water-based, plastisol — 40–55+ LPI |
| 198 Hi-Dro | 🟨 Yellow | 40 µm | 44% | Fine detail, lighter ink deposits, photographic simulated process |
| 230 Hi-Dro | 🟨 Yellow | 40 µm | 38% | High-detail halftones, 4-color process, fine-line artwork |
| 305 Hi-Dro | 🟨 Yellow | 31 µm | ~36% | Ultra-fine photographic detail — handle with extra care |
Hi-Dro vs. Hi-Tex — Choosing the Right Mesh for Your Newman Roller Frame
Both Hi-Dro and Hi-Tex panels are available for Newman roller frames. Most shops stock both and switch based on job type. Here’s how to decide:
| Feature / Factor | 💧 Hi-Dro (This Product) | 🔴 Hi-Tex |
|---|---|---|
| Thread Diameter (157 count) | 48 µm — Thinner | 64 µm — Thicker |
| Open Area (157/158 count) | 46% — More Open | ~38% — Less Open |
| Squeegee Pressure Needed | Lower — less effort per stroke | Higher — more force required |
| Water-Based Performance | Excellent — purpose-built | Good — must degrease first |
| Plastisol Performance | Good — softer hand result | Excellent — workhorse for heavy deposits |
| Halftone Performance | Excellent — less dot clipping | Good — thicker threads clip fine dots |
| Surface Treatment | Plasma treated — coat immediately | None — must degrease before use |
| Tear Resistance | Handle with care | More durable — thicker threads |
| Best For | Water-based, discharge, halftones, soft-hand plastisol | Heavy plastisol, underbases, high-deposit production |
Pro tip: Most high-performance shops stock both. One mesh type for water-based and halftone work, the other for heavy plastisol production. Roller frames make switching practical — retension to the new mesh count and go.
Related Products & Supplies
Complete your Newman roller frame setup with the right emulsions, inks, and accessories.
🔴 Saati Hi-Tex MZX Roller Frame Panels →
Standard thread for MZX frames. Better for heavy plastisol underbases and high-deposit production at MZX tension levels.
💧 Saati Hi-Dro M3 Roller Frame Panels →
If you have M3 frames instead — Hi-Dro thin thread mesh for the 1 5/8″ roller, 85N system.
🔗 Newman Roller Frame Locking Strip 50ft →
Replacement locking strips for Newman roller frames. Essential consumable for DIY mesh re-installation.
Coat Hi-Dro panels immediately after installation. SBQ, dual-cure, and diazo for every ink system.
Water-based, discharge, plastisol, and specialty inks — matched to every Hi-Dro mesh count.
Ink removers, emulsion removers. No adhesive in the locking strip system means no glue contamination.
(512) 454-0505 · [email protected] · Same-day shipping before 3:30 PM CT · Free shipping over $200
Technical Specifications
Technical Specifications — Saati Hi-Dro MZX Newman Roller Frame Panels 23″×31″ (6-Pack)
Drop Ship · Nortech Graphics · Drop Ship · Nortech Graphics, Arkansas
| Mesh Type | Saati Hi-Dro — high modulus, low elongation monofilament polyester with proprietary DBD plasma surface treatment |
| Frame Compatibility | Newman MZX-style roller frames ONLY — 1 7/16″ roller diameter. NOT compatible with M3 frames. |
| Frame Size | 23″ × 31″ |
| Pack Quantity | 6 panels per pack |
| Available Mesh Counts | 110 (White) · 157 (White) · 157 (Yellow) · 198 (Yellow) · 230 (Yellow) · 305 (Yellow) |
| Thread Diameter Range | 31 µm (305 count) to 64 µm (110 count) — thinner than Hi-Tex at same count |
| Surface Treatment | Proprietary plasma treatment (DBD) — no degreasing required |
| Degreasing Required | No — coat directly after installation and tensioning |
| Ink Compatibility | Water-based, discharge, HSA, and plastisol inks — purpose-built for water-based |
| MZX Frame Specs | Roller diameter: 1 7/16″ · Max tension: 35 Newtons · Torque (black bolts): 35 ft/lbs max |
| Panel Note | Mesh panel only — roller frame not included. Newman Roller Master or manual tools required. |
| Handling Note | Thin thread — more fragile than Hi-Tex. Follow Newman tension chart for each mesh count. |
| Shipping | Drop ship — Nortech Graphics, Arkansas. Times vary. Contact us at [email protected] or (512) 454-0505. |
Technical Sheets / Safety Data Sheets / Documents
FREQUENTLY ASKED QUESTIONS
Are these panels compatible with M3 Newman roller frames?
No. MZX panels fit MZX frames only (1 7/16″ roller, 35N max). M3 frames have a 1 5/8″ roller — different channel profile. If you have M3 frames, order Hi-Dro M3 panels instead. Call us at (512) 454-0505 if unsure.
What is the difference between Newman MZX and M3 frames?
MZX: 1 7/16″ roller, 35N max tension, lighter, manual press and small auto shops.
M3: 1 5/8″ roller, 85N max tension, 300% stronger, production auto press shops.
Different locking strip profiles — panels are NOT interchangeable between the two.
Do Hi-Dro MZX panels need to be degreased before coating?
No. Plasma-treated — coat immediately after installation. Hi-Tex MZX panels do require degreasing before every use.
What is the difference between Hi-Dro and Hi-Tex for MZX roller frames?
Hi-Dro: thin thread, plasma treated, no degreasing, best for water-based and halftones. Hi-Tex MZX: standard thread, must degrease, best for heavy plastisol and underbases. Most shops stock both.
Where do these ship from?
Drop ship from Nortech Graphics, Arkansas. Times vary. [email protected] · (512) 454-0505.
Not sure which panels fit your frames? Call us before ordering.
(512) 454-0505 | [email protected]
Reviews
Only logged in customers who have purchased this product may leave a review.
You May Also Like
Related products
-
Saati Hi-Dro M3 Newman Style Roller Frame Mesh Panels 23″×31″ (6-Pack) – Thin Thread Plasma-Treated Mesh for Newman M3 Retensionable Roller Frames
Price range: $99.99 through $109.99 -
Nortech Newman Roller Frame Locking Strip 50ft Roll
$99.99 -
Saati Hi-Tex M3 Newman Style Roller Frame Mesh Panels 23″×31″ (6-Pack) – Standard Thread Heavy-Duty Mesh for Newman M3 High-Tension Production Roller Frames
Price range: $99.99 through $139.99 -
Saati Hi-Tex MZX Newman Style Roller Frame Mesh Panels 23″×31″ (6-Pack) – Standard Thread Heavy-Duty Mesh for Newman MZX High-Tension Production Roller Frames
Price range: $99.99 through $139.99
Reviews