Blue Skies Siser EasyPSV® Permanent 24″ Sign Vinyl – Your Solution for Durable Graphics

Using Siser PSV Sign Vinyl is a straightforward process, and following these application instructions will help you achieve professional-quality results:

Materials You’ll Need:

• Siser PSV Sign Vinyl
• Transfer/Application Tape
• Cutting Machine (if you’re cutting your own design)
• Weeding Tool
• Squeegee

Step-by-Step Application:

1. Design and Cut: Begin by designing your graphic or text. If you’re using a cutting machine, make sure your design is not reversed or mirrored. Place the Siser PSV Sign Vinyl with the liner side (backing paper) down on your cutting machine and cut your design.
2. Weed the Excess Vinyl: Carefully weed away the excess vinyl material, leaving only your intended design on the backing paper. Use a weeding tool to help remove small or intricate pieces.
3. Prepare the Transfer Tape: Remove the paper liner from the transfer or application tape. Place the transfer tape adhesive side down onto the top of your weeded Siser PSV Sign Vinyl design. Use a squeegee to firmly press down on the transfer tape, ensuring it adheres well to the vinyl.
4. Peel Away Transfer Tape: Gently lift the application tape, along with the Siser PSV Sign Vinyl design, away from the paper liner. Make sure your vinyl design adheres to the transfer tape completely.
5. Position on Desired Surface: Carefully place the application tape with the vinyl design onto your desired object or surface. Ensure proper alignment and positioning.
6. Burnish for Adhesion: Use a squeegee to burnish (rub) the entire surface of the application tape. This step helps ensure a strong bond between the vinyl and the surface.
7. Peel Away Application Tape: Gently peel away the application tape at a sharp angle, leaving only your Siser PSV Sign Vinyl design adhered to the object. Start from one corner and gradually peel back the tape while keeping it close to the surface.
8. Final Inspection: Once you’ve removed the application tape, inspect your design for any air bubbles or imperfections. If needed, use the squeegee to smooth out any remaining bubbles.

Following these steps, you’ll successfully apply Siser PSV Sign Vinyl to your chosen surface. Whether you’re creating signage, decorations, or custom projects, these instructions will help you achieve a professional and durable finish.