Printers Choice 24″ Application Tape for Sign Vinyl – Flawless Transfer Solution

Recommended Applications:

• Perfect for computer-cut graphics and die-cut lettering
• Especially effective with small and medium-size plotters

Technical Specifications:

• Width: 24″
• Thickness: 4 mil
• Adhesive Type: Natural Rubber High Tack
• Suitable for: Computer Cut Graphics, Die-Cut Lettering
• Recommended for: Small and Medium Size Plotters

Elevate your lettering and graphics transfer process with Printers Choice High Tack Application Tape. Experience unmatched precision, effortless application, and consistent results with a product designed to meet the demands of professional graphic transfer. Bid farewell to challenges and welcome a new era of flawless designs with Printers Choice High Tack Application Tape.

Using Printers Choice High Tack Application Tape with Sign Vinyl – Easy Steps for Flawless Transfer!

Step 1: Prepare Your Workspace

Set up your workspace with the necessary tools: Printers Choice High Tack Application Tape, your cut vinyl design, a squeegee, and a clean, smooth surface for application.

Step 2: Cut and Weed Your Design

Cut and weed your sign vinyl design according to your project requirements. Ensure that the design is clean and free from any debris or excess vinyl.

Step 3: Applying the Application Tape

1. Lay the cut and weeded vinyl design flat on a clean surface, with the adhesive side facing up.
2. Unroll a sufficient length of Printers Choice High Tack Application Tape. Position it gently over the vinyl design, aligning it carefully.

Step 4: Smoothing and Bonding

1. Using a squeegee or a similar tool, gently press down on the application tape. Start from the center and move outward, ensuring that the tape adheres to the vinyl design smoothly and evenly.
2. Apply firm but even pressure to ensure complete bonding between the application tape and the vinyl.

Step 5: Peeling Off the Application Tape

1. Once the application tape is securely adhered to the vinyl design, gently peel off the tape’s backing paper at a 45-degree angle. The vinyl design should lift smoothly with the application tape.
2. Continue peeling until the entire design is transferred onto the application tape.

Step 6: Applying the Vinyl Design

1. Carefully position the application tape with the vinyl design over the desired surface.
2. Gently press down the application tape and vinyl design onto the surface, starting from the center and moving outward. Use a squeegee to ensure proper adhesion.

Step 7: Removing the Application Tape

1. Once the vinyl design is securely applied to the surface, slowly peel off the application tape at a 45-degree angle. Make sure the vinyl design remains on the surface.
2. If any part of the vinyl lifts with the application tape, press it down and re-peel that section.

Congratulations, you’ve successfully used Printers Choice High Tack Application Tape to transfer your sign vinyl design! Enjoy the professional and flawless results of your project.