Saati Duralife Squeegee Blade – Full 144” Roll for Screen Printing

Saati Duralife 144″ Roll — Bulk Blade Stock for Production Shops

For shops that go through squeegee blades at volume, buying roll stock is the practical solution. A full 144-inch Saati Duralife urethane roll gives you 12 feet of premium blade material to cut to whatever lengths your squeegee handles require. One roll stocks blades for multiple handles, covers custom sizes that aren’t available in standard cut lengths, and eliminates the need to order individual per-foot lengths for each handle. Saati Duralife urethane — the same material as the per-foot blade stock, just in roll format for volume buyers.

1. Measure your squeegee handle’s blade slot width precisely — blade should fit snugly without gaps.
2. Mark the cut line on the blade stock with a permanent marker and straightedge.
3. Cut with a sharp utility knife and metal straightedge guide, a guillotine blade cutter, or a miter saw with a fine-tooth blade.
4. Inspect the cut edge — it should be clean and perpendicular to the blade length. Any angled cut will produce uneven ink deposit.
5. Insert blade into handle, tighten set screws or retainer clamps uniformly across the blade length.
6. Test print on scrap material to verify consistent edge contact before production.

📐 Understanding Squeegee Durometer

Durometer is the Shore A hardness rating of the squeegee blade — a standardized measurement of how stiff or flexible the blade material is. It directly determines how much ink passes through the mesh and the sharpness of the printed edge.

🔧 Squeegee Blade Care & Sharpening

• Clean blades immediately after printing — dried ink hardens on urethane and requires more aggressive cleaning, which accelerates edge wear.
• Store blades edge-up or hanging — never lay a squeegee flat with blade down. The edge deforms under the handle weight over time.
• Sharpen regularly — a dull blade requires more pressure to shear ink through the mesh, which increases mesh wear, stencil wear, and wrist fatigue. Sharpen when you notice ink deposit becoming uneven or edges ragged.
• Inspect for nicks and flat spots — a nicked blade leaves streaks and uneven ink deposit. Sharpen past the nick or replace the blade section.
• Use a squeegee sharpener or lap grinder — hand sharpening on sandpaper creates uneven bevels. A dedicated sharpener produces a consistent edge across the full blade length.

Contact Us →