Matsui White 301W is a high mesh direct print and mixing white that can be mixed with “Neo Pigments” to achieve an extremely soft hand feel and pastel colors.
Can be used as a mixing white with Neo Pigments up to 15%
Prints through very high mesh counts for minimum ink usage
Excellent printability with no viscosity modifications
Extremely soft hand feel that PVC inks cannot achieve
Creates an opaque white print and superb softness
OEKO-TEX® Standard 100 certified, CPSIA and HR4040 Compliant
Is “PVC Free” and environmentally safe
Technical Specifications
Application:
Print through fine screen mesh up to 305 mc in (120 mc cm) when cured at 320°F (160°C), White 301 W produces the softest prints achievable in textile screen printing today.
Special Recommendations:
White 301 W should be mixed in clean vessels using clean mixing blades and utensils. Any contamination from other ink sources or non-approved additives could make White 301 W test positive for restricted PVC’s.
White 301 W can be dry cleaned or ironed
Use Retarder MG 1-5% to help with open time in the screen
Use Fixer WF-N 1-5% to help with wash fastness
Use Softener MG 1-4% to help penetrate in to the garment
Use Thickener B .25-1% to help thicken the ink
Use RV Additive 1-3% to reduce viscosity
Matsui 301W White Characteristics:
Wet Ink Tack | Low
After Flash Tack | Low
Printability | Excellent
Surface Appearance | Matte
Opacity/Viscosity | High/Low
Bleed Resistance | None
Flash Temperature | 160°F (71°C)/decreases with deposit thickness
Cure Temperature | 320°F (160°C)
Squeegee Hardness | Medium
Squeegee Blade | Sharp
Squeegee Angle | 45 degrees to screen
Squeegee Speed | Medium
Underlay | Excellent
Emulsion | Direct or indirect
Mesh Count | 110-305 mc in (43-120 mc cm)
Thinner | RV Additive
Thickener | Thickener B
Storage | 65°F to 95°F (18°C to 35°C). Avoid direct sun.
Cleanup | Water and mild soap or detergent
Color Range | White
Substrate Type | Cotton
Substrate Color(s) | Light, Medium and Dark Fabrics
Quick View
