Matsui Acrylicon White Water Base Screen Printing Ink

Acrylicon White is a direct print and mixing white for “Performance” and high stretch fabrics that can be mixed with “Neo Pigments” to achieve an extremely soft hand feel and excellent elasticity. Yielding a soft and “silicon-like” finish with zero tack.

$29.99$299.99

  • 5 Gallon
  • Gallon
  • Quart
Clear
SKU: MAT Acrylicon White Category:

Features

  • Easy to mix and print
  • Can be used as a mixing white with Neo Pigments up to 15%
  • Excellent printability with no viscosity modifications
  • Extremely soft hand feel that PVC inks cannot achieve
  • Excellent elasticity, great on Dri-fit performance fabrics
  • Creates an opaque white print and superb softness
  • Is “PVC Free” and environmentally safe

Application:
Print through fine screen mesh up to 160 mc in (63 mc cm) when cured at 320°F (160°C), Acrylicon White produces the soft and unique hand feel.

Special Recommendations:
Acrylicon White should be mixed in clean vessels using clean mixing blades and utensils. Any contamination from other ink sources or non-approved additives could make Acrylicon White test positive for restricted PVC’s.

  • Stretch White 301 can be dry cleaned or ironed
  • Use Retarder MG 1-5% to help with open time in the screen
  • Use Fixer WF-N 1-5% to help with wash fastness
  • Use Softener MG 1-4% to help penetrate in to the garment
  • Use Thickener B .25-1% to help thicken the ink
  • Use RV Additive 1-3% to reduce viscosity

Technical Data Sheet:

  • Wet Ink Tack | Low
  • After Flash Tack | Low
  • Printability | Excellent
  • Surface Appearance |Matte
  • Opacity/Viscosity | Excellent/Low
  • Bleed Resistance | None
  • Flash Temperature | 160°F (71°C)/decreases with deposit thickness
  • Cure Temperature | 320°F (160°C)
  • Squeegee Hardness | Medium
  • Squeegee Blade | Sharp
  • Squeegee Angle | 45 degrees to screen
  • Squeegee Speed | Medium
  • Underlay | Excellent
  • Emulsion | Direct or indirect
  • Mesh Count | 86-160 mc in (34-63 mc cm)
  • Thinner | RV Additive
  • Thickener | Thickener B
  • Storage | 65°F to 95°F (18°C to 35°C). Avoid direct sun.
  • Cleanup | Water and mild soap or detergent
  • Color Range | White
  • Substrate Type |Cotton
  • Substrate Color(s) | Light, Medium and Dark Fabrics

Product categories

You May Also Like

Additional Options