Matsui Silver Shimmer 620 Water Base Ink – Soft Metallic Brilliance

Application Information:

Print with confidence through fine screen mesh up to 110 mc in (43 mc cm) and cure at 320°F (160°C). Matsui Metallic Binder 301 produces the softest prints imaginable, delivering captivating metallic finishes that will leave your audience in awe.

Special Recommendations:

To ensure optimal performance, mix Metallic Binder 301 in clean vessels using clean mixing blades and utensils. Avoid any contamination from other ink sources or non-approved additives to maintain its pristine quality.

For enhanced printing capabilities and longevity of your prints, consider the following special recommendations:

1. Dry Cleaning and Ironing: Prints made with Metallic Binder can be safely dry cleaned or ironed, preserving the quality and appearance of your designs.
2. Retarder MG: Incorporate 1-5% of Retarder MG to extend the open time in the screen, allowing for smoother and more controlled printing.
3. Fixer WF-N: Boost the wash fastness of your prints by adding 1-5% of Fixer WF-N to the ink, ensuring that your designs withstand repeated washings without compromising on vibrancy.
4. Softener MG: Achieve better penetration into the garment by adding 1-4% of Softener MG to the ink, resulting in long-lasting and vivid prints with an exceptional soft hand feel.
5. Thickener B: To adjust the ink’s consistency according to your printing needs, consider adding 0.25-1% of Thickener B to thicken the ink.
6. RV Additive: Fine-tune the viscosity of Metallic Binder with 1-3% of RV Additive, enhancing control and printability during the printing process.

Additionally, you have the option to add 6%-9% Quick Additive, which contains Fixer WF-N, Retarder MG, and Softener MG, to further enhance performance and achieve desired printing effects.

Technical Data Sheet:

• Wet Ink Tack: Low
• After Flash Tack: Low
• Printability: Excellent
• Surface Appearance: Matte
• Opacity/Viscosity: High/Low
• Bleed Resistance: None
• Flash Temperature: 160°F (71°C)/decreases with deposit thickness
• Cure Temperature: 320°F (160°C)
• Squeegee Hardness: Medium
• Squeegee Blade: Sharp
• Squeegee Angle: 45 degrees to screen
• Squeegee Speed: Medium
• Underlay: N/A
• Emulsion: Direct or indirect
• Mesh Count: 86-110 mc in (34-43 mc cm)
• Thinner: RV Additive
• Thickener: Thickener B
• Storage: 65°F to 95°F (18°C to 35°C). Avoid direct sun.
• Cleanup: Water and mild soap or detergent
• Color Range: Pearlescent
• Substrate Type: All
• Substrate Color(s): Light, Medium, and Dark Fabrics

Unleash the captivating brilliance of Matsui Metallic Binder 301 and add a touch of opulence to your prints. Elevate your designs with lustrous metallic finishes that leave a lasting impression. Embrace innovation and distinction with Matsui Metallic Binder 301, where creativity meets brilliance.

Note: The printer must test the ink before a production run. River City Supply and affiliates are not responsible for dye migration or misuse of this product. It is imperative for the printer to test and ensure the ink is properly cured and opaque enough to prevent dye migration on particular fabrics.

.

Matsui Silver Shimmer Base Technical Data Sheet

Matsui Silver Shimmer Base Safety Data Sheet