Matsui Digital DS Hybrid Underbase White


Matsui DS Hybrid UB White is a soft hand white screen ink used as an under base in digital hybrid printing to improve the hand feel of the final print. Recommended for use as and under base to Digiace Digital Screen Clear or DS Hybrid Pre-Digital Clear for best results.



SKU: N/A Category:


Print before DS Hybrid Pre-Digital Clear or Digiace Digital Screen Clear through screen mesh up to 230 in (90 cm) with a recommend dyer temperature of 320°F (160°C) for 2-3 minutes, DS Hybrid UB White produces the softest prints achievable in textile hybrid screen printing today.

Special Recommendations:
Matsui DS Hybrid UB White should be mixed in clean vessels using clean mixing blades and utensils. Any contamination from other ink sources or non-approved additives could make DS Hybrid UB White test positive for restricted PVC’s.

Technical Specifications

Technical Data Sheet

  • Wet Ink Tack | Low
  • After Flash Tack | Low
  • Printability | Excellent
  • Surface Appearance | White
  • Opacity/Viscosity | Low/Low
  • Bleed Resistance | None
  • Gel Point/Flash Time | 160°F (71°C)/decreases with deposit thickness
  • Fusion Temperature | 320°F (160°C)
  • Squeegee Hardness | Medium
  • Squeegee Blade | Sharp
  • Squeegee Angle | 15 degrees to screen
  • Squeegee Speed | Medium
  • Underlay | DS Hybrid UB Clear
  • Emulsion | Direct or indirect
  • Mesh Count | 80-230 mc in (31-90 mc cm)
  • Thinner | RV Additive
  • Thickener | Thickener B
  • Storage | 65°F to 95°F (18°C to 35°C). Avoid direct sun.
  • Cleanup | Water and mild soap or detergent
  • Color Range | Milky
  • Substrate Type | Most
  • Substrate Color(s) | Light, Medium, and Dark Fabrics


Product categories

You May Also Like

Additional Options