Matsui Complete Pigment Set


Matsui Complete Pigment Kit. For use with waterbased and discharge inks. This kit contains all 13 of the NEO Colors in .25 or 2 pound bottles.


  • Quart
  • Sample Kit
SKU: Mat Neo Pigment Set Categories: ,

Pigment Colors Included
(.25 lb) or (2 lb.) – Neo Yellow M3G
(.25 lb) or (2 lb.) – Neo Yellow MGR
(.25 lb) or (2 lb.) – Neo Gold Yellow MFR
(.25 lb) or (2 lb.) – Neo Orange MGD
(.25 lb) or (2 lb.) – Neo Red MGD
(.25 lb) or (2 lb.) – Neo Red MFB
(.25 lb) or (2 lb.) – Neo Rose MB
(.25 lb) or (2 lb.) – Neo Pink MB
(.25 lb) or (2 lb.) – Neo Violet MFB
(.25 lb) or (2 lb.) – Neo Navy Blue MB
(.25 lb) or (2 lb.) – Neo Blue MB
(.25 lb) or (2 lb.) – Neo Blue MG
(.25 lb) or (2 lb.) – Neo Green MB
(.25 lb) or (2 lb.) – Neo Black MK


MESH – 80-160
STENCIL – A water proof direct emulsion or capillary film should be used for optimal performance.
SQUEEGEE – 60-80 Durometer square edge
MIXING – Mix 10% or less pigment with 100% discharge binder making sure to mix pigment into binder before mixing in the Discharge Agent. Discharge Agent should be mixed 10% into 100% discharge binder (by weight). Fixer N can be added to improve wash fastness.
DRYING – Matsui Water-Based Discharge System ink must be heat cured for 2.5 – 3 minutes at 300 to 320 degrees F.
FINISHING – It is highly recommended to wash and dry garments or fabrics before packaging and shipping.
CLEAN UP – Use water and mild soap to wipe screens, screen frames and squeegees and any surfaces in contact with ink.

** It is the responsibility of the printer to test and determine suitability of all products before a production run.
Application techniques may vary.

Product categories

You May Also Like

Additional Options