Matsui Alpha Series Ready For Use Water Base or Dischargeable Starter Kit


The Alpha Series by Matsui is a revolutionary 15 color mixing system in which all the water based colors in the system are Ready For Use. Not only does that mean they can be printed individually, Matsui has created the system to work directly with your Pantone Color Book to mix completely unique colors without needing software – making this system the quickest and most economical way to create custom colors.   Alpha series inks can also be printed on top of a white water base ink or discharge underbase.  You can also use this system on dark cotton fabrics by adding discharge agent into the ink at 3% to 5%.



SKU: Mastsui Alpha Starter Kit Category:



  • Easy to mix and print
  • Add up to 3% Fixer WF-N to improve wash fastness
  • Excellent for 100% cotton, blends, and Polyester (with Under Base Blocker)
  • Excellent printability with no viscosity modifications
  • Extremely soft hand feel that PVC inks cannot achieve
  • Is “PVC Free” and environmentally safe
  • Can be printed wet-on-wet

Kit Includes:

Alpha Color Orange 021C
Alpha Color Warm Red C
Alpha Color Rubine Red C
Alpha Color Rhodamine Red C
Alpha Color Purple C
Alpha Color Medium Purple C
Alpha Color Violet C
Alpha Color Dark Blue C
Alpha Color Reflex Blue C
Alpha Color Process Blue C
Alpha Color Green C
Alpha Color Black C
Alpha Color Trans White

Technical Specifications


Print through mesh up to 230 mc in (90 mc cm) and cure at 320°F (160°C).

Special Recommends:

Infinity Colors should be mixed in clean vessels using clean mixing blades and utensils. Any contaminaton from other ink sources or non-approved additives could make Infinity Colors test positive for restricted PVC’s.

  • Use Retarder MG 1-3% to help with open me in the screen
  • Use Fixer WF-N 1-3% to help with wash fastness
  • Use Softener MG 1-5% to help penetrate in to the garment
  • Use Fixer L 1-3% with low curing fabrics or electric dryers

Technical Data Sheet:

  • Wet Ink Tack | Good
  • After Flash Tack | Good
  • Printability | Excellent
  • Surface Appearance | Matte
  • Opacity/Viscosity | Med/Med
  • Bleed Resistance | None
  • Flash Temperature | 160°F (71°C)/decreases with deposit thickness
  • Cure Temperature | 320°F (160°C)
  • Underlay | N/A
  • Emulsion | Direct or indirect
  • Mesh Count | 110-230 mc in (43-90 mc cm)
  • Thinner | RV Additive
  • Thickener | Thickener B
  • Storage | 65°F to 95°F (18°C to 35°C). Avoid direct sun
  • Cleanup | Water and mild soap or detergent
  • Color Range | Various Substrate
  • Type | Cotton and Cotton Poly blends
  • Substrate Color(s) | Light, Medium and Dark Fabrics



Product categories

You May Also Like

Additional Options