Matsui WS0534 Foil Blocker 301 – Anti-Foil Base Designed To Prevent Foil From Adhering To Specific Print Areas
Matsui
Foil Blocker 301 is a specialized anti-foil base designed to prevent foil from adhering to specific print areas. By applying Foil Blocker 301 to the areas where foil application is undesired, you can achieve precise and clean foil transfers.
Easy to Mix and Print: Simplifies the mixing and printing process.
Effective Foil Resistance: Prevents foil from sticking in areas where it is applied.
Excellent Printability: Maintains consistent viscosity without modifications, ensuring smooth application.
Soft Hand Feel: Delivers a softness that PVC inks cannot achieve, enhancing garment comfort.
Eco-Friendly: PVC-free and environmentally safe, supporting sustainable printing practices.
Technical Specifications
Application:
Screen Mesh: Print through mesh screens up to 150/inch (59/cm).
Curing: Cure at 320°F (160°C) for optimal results. For best foil resistance, use minimal pressure, no more than 8 seconds, and a transfer press temperature of 350°F.
Effective Blocking: Ensures foil does not stick to undesired areas, providing clean and precise foil prints.
Special Recommendations:
Clean Mixing: Ensure all mixing vessels and utensils are clean to avoid contamination that could result in positive PVC tests.
Additives:
Retarder MG: 1-5% to extend open time in the screen.
Fixer WF-N: 1-5% to enhance wash fastness (if applicable).
Softener MG: 1-4% to help ink penetrate the garment.
Thickener B: 0.25-1% to adjust ink thickness.
RV Additive: 1-3% to reduce viscosity.
Technical Data Sheet:
Wet Ink Tack: Low
After Flash Tack: Low
Printability: Excellent
Surface Appearance: Matte
Opacity/Viscosity: Low/Low
Bleed Resistance: None
Flash Temperature: 160°F (71°C), decreases with deposit thickness
Cure Temperature: 320°F (160°C)
Squeegee Hardness: Medium
Squeegee Blade: Sharp
Squeegee Angle: 45 degrees
Squeegee Speed: Medium
Underlay: Not applicable
Emulsion: Direct or indirect
Mesh Count: 110-150/inch (43-59/cm)
Thinner: Not applicable
Thickener: Thickener B
Storage: 65°F to 95°F (18°C to 35°C), avoid direct sunlight.
Cleanup: Water and mild soap or detergent
Color Range: Clear
Substrate Type: Suitable for all fabric types
Substrate Colors: Light, Medium, and Dark Fabrics
Matsui Foil Blocker 301 provides screen printers with a reliable solution to control foil application, ensuring clean and precise foil prints. Its ease of use and excellent performance make it an essential addition to any printing setup.
Reviews