Matsui WB0629 Kombat Black – Premium Direct Printing Black Ink Designed For Halftone And Spot Printing On Performance Fabrics

Matsui WB0629 Kombat Black  Application:

• Screen Mesh: Print through fine mesh screens up to 180/inch (72/cm).
• Curing: Cure at 320°F (160°C) to achieve the softest and most durable prints.
• Suitable Fabrics: Ideal for light, medium, and dark fabrics across all types of substrates.

Special Recommendations:

• Clean Mixing: Ensure all mixing vessels and utensils are clean to avoid contamination.
• Additional Additives:
  • Retarder MG: 1-5% to extend open time in the screen.
  • Fixer WF-N: 1-5% to enhance wash fastness.
  • Softener MG: 1-4% to help ink penetrate the garment.
  • Thickener B: 0.25-1% to adjust ink thickness.
  • RV Additive: 1-3% to reduce viscosity.
• Ironing and Dry Cleaning: Prints can be dry cleaned or ironed without issue.

Technical Data Sheet:

• Wet Ink Tack: Low
• After Flash Tack: Low
• Printability: Excellent
• Surface Appearance: Matte
• Opacity/Viscosity: High/Low
• Bleed Resistance: None
• Flash Temperature: 160°F (71°C), decreases with deposit thickness
• Cure Temperature: 320°F (160°C)
• Squeegee Hardness: Medium
• Squeegee Blade: Sharp
• Squeegee Angle: 45 degrees
• Squeegee Speed: Medium
• Underlay: Not applicable
• Emulsion: Direct or indirect
• Mesh Count: 110-180/inch (43-72/cm)
• Thinner: RV Additive
• Thickener: Thickener B
• Storage: 65°F to 95°F (18°C to 35°C), avoid direct sunlight.
• Cleanup: Water and mild soap or detergent
• Color Range: Black
• Substrate Type: Suitable for all fabric types
• Substrate Colors: Light, Medium, and Dark Fabrics

Matsui WB0629 Kombat Black is the perfect choice for screen printers seeking a high-performance black ink that delivers exceptional print quality, durability, and a soft hand feel. Its versatility and ease of use make it an essential addition to any professional printing setup.

Matsui Kombat Black Technical Data Sheet