Matsui WS0528 EasyPrint Mat 301 – Semi-Opaque Mixing Base Designed For “Performance” And High-Stretch Fabrics

Matsui WS0528 EasyPrint Mat 301 Application:

• Screen Mesh: Print through fine mesh screens up to 225/inch (89/cm).
• Curing: Cures at 320°F (160°C) to produce the softest prints achievable in textile screen printing.
• Dark Fabrics: Use a sublimation blocker for polyester substrates to prevent dye migration.

Special Recommendations:

• Clean Mixing: Ensure all vessels and utensils are clean to avoid contamination.
• Ironing: Prints can be ironed.
• Additives:
  • Retarder MG: 1-5% to extend open time.
  • Fixer WF-N: 1-5% to enhance wash fastness.
  • Softener MG: 1-4% to help ink penetrate the garment.
  • Thickener B: 0.25-1% to adjust thickness.
  • RV Additive: 1-3% to reduce viscosity.

Technical Data Sheet:

• Wet Ink Tack: Low
• After Flash Tack: Low
• Printability: Excellent
• Surface Appearance: Matte
• Opacity/Viscosity: Medium/Medium
• Bleed Resistance: None
• Flash Temperature: 160°F (71°C), decreases with deposit thickness
• Cure Temperature: 320°F (160°C)
• Squeegee Hardness: Medium
• Squeegee Blade: Sharp
• Squeegee Angle: 45 degrees
• Squeegee Speed: Medium
• Underlay: 301 Series
• Emulsion: Direct or indirect
• Mesh Count: 86-225/inch (34-89/cm)
• Thinner: RV Additive
• Thickener: Thickener B
• Storage: 65°F to 95°F (18°C to 35°C), avoid direct sunlight.
• Cleanup: Water and mild soap or detergent
• Color Range: Milky
• Substrate Type: Cotton and polyester with sublimation blocker
• Substrate Colors: Light, medium, and dark fabrics

Note: This product will be drop shipped directly from Matsui in Gardena, California. Please allow an additional 2-3 days for processing before your order is shipped. Thank you for your understanding and patience.

Matsui WS0528 EasyPrint Mat 301