Matsui WS0540 Soft-Tex Clear 350 – Designed for “Performance” and High-Stretch Fabrics

Matsui WS0540 Soft-Tex Clear 350 Application:

• Screen Mesh: Print through fine mesh screens (110-160/inch recommended).
• Curing: Cures at 320°F (160°C), resulting in soft, silicone-like prints.
• Dark Fabrics: For dark polyester, use an Under Base Blocker first, flash, then print Soft Stretch White, flash, and finish with Soft Stretch Clear and colors.

Special Recommendations:

• Clean Mixing: Use clean vessels and utensils to avoid contamination.
• Ironing: Prints can be ironed.
• Additives:
  • Retarder MG: 1-5% to extend open time.
  • Fixer V: 2-3% to enhance wash fastness.
  • Thickener B: 0.25-1% to adjust thickness.
  • RV Additive: 1-3% to reduce viscosity.

Technical Data Sheet:

• Wet Ink Tack: Low
• After Flash Tack: Low
• Printability: Excellent
• Surface Appearance: Milky
• Opacity/Viscosity: Low/Medium
• Bleed Resistance: None
• Flash Temperature: 160°F (71°C)
• Cure Temperature: 320°F (160°C)
• Squeegee Hardness: Medium
• Squeegee Blade: Sharp
• Squeegee Angle: 45 degrees
• Squeegee Speed: Medium
• Emulsion: Direct or indirect
• Mesh Count: 110-160/inch
• Thinner: RV Additive
• Thickener: Thickener B
• Storage: 65°F to 95°F (18°C to 35°C), avoid direct sun.
• Cleanup: Water and mild soap or detergent
• Color Range: Matte
• Substrate Type: Cotton, Polyester
• Substrate Colors: Light and Medium Fabrics

Soft-Tex Clear 350 provides screen printers with a versatile and eco-friendly option for high-quality, soft, and elastic prints on performance fabrics. Ideal for creating custom color shades and achieving professional results on a variety of substrates.